EFI Submersible Fuel Pumps

Submersible Pump bulk head terminals.

sku: 866-030

THIS BULKHEAD TERMINAL IS E85 COMPATIBLE.

Bulk head terminal for passing power through a bulk head or fuel tank. Max 40AMP per terminal. Delrin plastic insulator, viton orings and stainless steel bolt(M6 x 30mm) washers and nyloc nut.
Ideal for providing power to submersible pump(s)
NOTE ***Sold as 1 each not as a pair.**

wiring kit - intank 22 Amp submersible pump wiring with eyelet terminal

sku: 866-020

THIS CONNECTOR SET IS E85 COMPATIBLE.
In Tank Wiring - Milspec Tefzel 16 Gauge wire for 22 Amp continuous operation.

Kit contains E200 Viton Heatshrink.
Wire length 500mm each

wiring kit - intank 34 Amp submersible pump wiring with eyelet terminal

sku: 866-021

THIS CONNECTOR SET IS E85 COMPATIBLE.
In Tank Wiring - Milspec Tefzel 14 Gauge wire for 34 Amp continuous operation.

Kit contains E200 Viton Heatshrink.
Wire length 500mm

EFI Submersible Pump 520Hp Bosch

sku: 866-520

OEM Bosch - Part Number 0 580 254 040
- >127l/h @ 6.5bar
- Open base inlet for in-tank installation
- M10x1.0 outlet fitting
- M5 and M6 -/+ screw terminals
- Draws ~11.0A @ 6.5bar

Walbro GS341 650HP Submersible Pump

sku: 866-650

TI Automotive GS342
This fuel pump is commonly used as a fuel pump upgrade for many Subaru vehicles.

Walbro GS342 650HP Submersible Pump

sku: 866-651

TI Automotive GS341
This fuel pump is commonly used as a fuel pump upgrade for many Mitsubishi EVO vehicles.

Denso VE Commodore Fuel Pump Upgrade

sku: 866-656

Upgrade your pump from 185L/Hr to 220L/Hr @ 12 Volts and 4 Bar

Pump replaces your standard pump in original location in your MRA (Modular Reserve Assembly). Note Only fit Denso Genuine MRA's

EFI Submersible 650HP Fuel Pump

sku: 866-655

This Denso In Tank EFI Fuel Pump is capable of flowing 650HP of Pump Gasoline/Petrol.
These 38.0 mm in Diameter 121.0 mm long with filter installed (114.0 mm with out filter) they come with all parts shown in photo. ** In Commodore VE applications - Note this suits factory Denso MRA Does not fit Delphi Replacement MRA***

R35 GTR Applications 2 Required - Reuse / purchase Nissan sock filters.

Idea

Bosch Fuel Pump 044 700HP

sku: 865-700

THIS FUEL PUMP IS E85 COMPATIBLE FOR 500HRS RUNNING TIME.

Genuine Bosch 044 Fuel Pump (Motorsport Rated).
M18 x 1.5 inlet 12x 1.5 outlet. Flows 4.6 L/Min @ 3.0bar on 12.8 Volts drawing 11 amps.

Genuine Bosch Pump with Part Number 0 580 254 044.

Walbro GSS-351G3 750HP Submersible Pump

sku: 866-751

TI Automotive GSS351G3.
Generation 3 of the GSS series fuel pumps (GSS341 &GSS342) but with 350 Liters Per hour.

Walbro GSS-352G3 750HP Submersible Pump

sku: 866-752

TI Automotive GSS352G3.
Generation 3 of the GSS series fuel pumps (GSS341 &GSS342) but with 350 Liters Per hour.

Walbro 450 - 800HP EFI Submersible E85, Flex Fuel and Gasoline High Flow Fuel Pump

sku: 866-800E

Walbro 450 Or Walbro 460

These Walbro fuel pumps are commonly referred to as a Walbro 450 or Walbro 460 fuel pump and are E85 compatible high-performance units.

Manufacturer- Walbro PN F9000267

<p>The fuel pump with Walbro Part number PN F9000274 is a high-pressure version of the Walbro Number F90000267 but with a sustained fuel pressure curve after 85 PSI and continue to 150 PSI.</p> <p>Uses 6 amps more current (see the chart on our website)</p

Walbro 450L/H High Pressure Version E85 Submersible Fuel Pump

sku: 866-800E-HP

Walbro 450 Or Walbro 460 HIGH PRESSURE VERSION

These Walbro fuel pumps are commonly referred to as a Walbro 450 or Walbro 460 fuel pump and are E85 compatible high-performance units.

Manufacturer- Walbro PN F90000274

Walbro 525 Hiflow High Pressure Fuel Pump

sku: 866-800-HF

Genuine Submersible Walbro Fuel Pump Part Number F-90000285. Also known as the Walbro Hellcat Fuel Pump.
High Pressure High Flow.
The latest performance fuel pump from Walbro. 10% higher volume and pressure than the Walbro 460 pump. See attached chart and graph. Continues to flow high volume even at 120 PSI

The latest performance fuel pump from Walbro. 10% higher volume and pressure than the Walbro 460 pump. See attached chart and graph. Continues to flow high volume even at 120 PSI

Walbro In Tank Fuel Pump E85 Extension Kit

sku: 866-650EX

THIS FUEL PUMP PICKUP EXTENSION KIT IS E85 COMPATIBLE.

As soon as you mount your brand new Walbro in-tank fuel pump to upgrade your fuel system, you are most probably going to run into a big problem.

The pump is not going to sit low enough to pick up fuel from the bottom of your tank. You might miss out on 1/3 or more of your fuel tank capacity.

Use this Walbro Fuel Pump Extension Kit extends your Filter Sock to lower your Filter Sock to the bottom of your tank.

The supplied hose is 230mm long, and you can cut it down to length so that your filter sock sits on the bottom of your fuel tank.

Problem solved!

FUEL IMMERSION COMPATIBILITY:
E10
E85
Ethanols
91 Octane Pump Fuel
95 Octane Pump Fuel
98 Octane Pump Fuel
Biodiesel
Diesel

Fits GS341, GS342

Do not use with F90000267 465 LPH or F90000262 365 LPH.
As these need to have the vapour ports at the bottom of the pump submerged at all times.

NOTE: Fuel Pump and Filter Sock not included and are for illustrative purposes only.
Note fuel pump and sock kits have the speed clip necessary to fit the adapter to the pump.

mra - modular reservoir assembly Ford BA FPV sedan

sku: 850-110P

FVP BA Falcon Fuel Pump
The pump flows
150 Liters per Hour @ 12V & 3 Bar pressure @ 8 Amps
135 Liters per Hour @ 12V & 4 Bar pressure @ 9 Amps

VT Commodore MRA Fuel Pump

sku: 850-121P

Holden VT Commodore MRA - Sedan and Wagon

mra - modular reservoir assembly VX Commodore Gen III LS1

sku: 850-120P

VE Commodore MRA Fuel Pump

sku: 850-130P

Early VE Commodore MRA.
This is for use as a dead end system regulated at 4 Bar pressure.

MRA EFI Fuel Tank Conversion Kit For Steel Tank 155mm to 180mm height- Dead End - Holden Commodore VE

sku: 850-130S

KIT SUPPLIED WITH:
1 x VE Commodore MRA (Dead End 4 Bar)
1 x Weld On Steel Ring
1 x Top Clamp Aluminium Ring
8 x Stainless Steel Cap Screws and Washers
1 x Fuel Safe Seal
1 x 3/8" Quick Disconnect to Barb Fitting
1 x Electrical Connector