Home  /  Fuel System Parts  /  Fuel Injectors, Bosch Fuel injectors  /  Motorsport EV14 Injectors

Motorsport EV14 Injectors

All of the injectors on this page are Late Model EV14 Bosch Injectors. These Bosch Injectors are both high flow and high performance.


Sort: Product NamePriceCode

Bosch Injector 347cc @ 3Bar 1/2 Height EV14 E85 Compatible with Extended Nose

Bosch Injector 347cc @ 3Bar 1/2 Height EV14 E85 Compatible with Extended Nose

sku: 851-347E

THIS INJECTOR IS E85 COMPATIBLE.

59 HP Normally Aspirated - estimated (pump petrol)
46HP Turbo up to 1 Bar Boost - estimated (pump petrol)
43 HP Turbo up to 2 Bar Boost - estimated (pump petrol)

> Flow Rate - 347cc/min (33lb/hr)
> Spray Pattern - 22 Degree Cone
> ORings - 14mm Top / 14mm Bottom
> Electrical Plug - Bosch EV1
> Impedance - 12 Ohms (High)
> Oring Top to Bottom / Center to Center without Height Adapter - 38.0mm
> Oring Top to Bottom / Center to Center with 11mm Top Oring Height Adapter - 64.5mm
> Oring Top to Bottom / Center to Center with 14mm Top Oring Height Adapter - 64.5mm
> Manufacturer - Bosch

These are 1/2 height so may require height adapter. These use a Bosch EV1 type plug P/N H-INJPB.

$145.00

(AUD, ex gst)

Bosch Injector 347cc @ 3Bar 1/2 Height EV14 E85 Compatible with Extended Nose
injector 39 lb/hr 410cc GM Bosch

injector 39 lb/hr 410cc GM Bosch

EV14 Half Height Injector with optional Injector Height Adapters with either 11mm or 14mm top orings to suit your fuel rail.

THIS INJECTOR IS E85 COMPATIBLE.

71 HP Normally Aspirated - estimated (pump petrol)
55 HP Turbo up to 1 Bar Boost - estimated (pump petrol)
51 HP Turbo up to 2 Bar Boost - estimated (pump petrol)


> Flow Rate - 410cc/min (39Lb/Hr) @4.0Bar
> ORings - 14mm Top / 14mm Bottom
> Electrical Plug - USCAR (Oval)
> Impedance - 12.2 Ohms (High)
> Spray Pattern -
> Oring Top to Bottom / Center to Center without Height Adapter - 38.0mm
> Oring Top to Bottom / Center to Center with 11mm Top Oring Height Adapter - 64.5mm
> Oring Top to Bottom / Center to Center with 14mm Top Oring Height Adapter - 64.5mm
> Manufacture - Bosch

Suits GM LS3 engine.

from $100.00

(AUD, ex gst)

injector 39 lb/hr 410cc GM Bosch
injector 52 lb/hr 550cc @4.0 Bar  470cc@ 3.0 bar GM Bosch

injector 52 lb/hr 550cc @4.0 Bar 470cc@ 3.0 bar GM Bosch

EV14 Half Height Injector with optional Injector Height Adapters with either 11mm or 14mm top orings to suit your fuel rail.

THIS INJECTOR IS E85 COMPATIBLE.

103 HP Normally Aspirated - estimated (pump petrol)
81 HP Turbo up to 1 Bar Boost - estimated (pump petrol)
75 HP Turbo up to 2 Bar Boost - estimated (pump petrol)


> Flow Rate - 550cc/min (52Lb/Hr) @4.0Bar
> ORings - 14mm Top / 14mm Bottom
> Electrical Plug - USCAR (Oval)
> Impedance - 12.0 Ohms (High)
> Spray Pattern -
> Oring Top to Bottom / Center to Center without Height Adapter - 38.0mm
> Oring Top to Bottom / Center to Center with 11mm Top Oring Height Adapter - 64.5mm
> Oring Top to Bottom / Center to Center with 14mm Top Oring Height Adapter - 64.5mm
> Manufacture - Bosch - Part Number 0 280 158 187

Suits GM LS3 engine.

from $98.00

(AUD, ex gst)

injector 52 lb/hr 550cc @4.0 Bar  470cc@ 3.0 bar GM Bosch
injector EV14 52 lb/hr 550cc motorsport 3/4 Height

injector EV14 52 lb/hr 550cc motorsport 3/4 Height

THIS INJECTOR IS E85 COMPATIBLE.

107 HP Normally Aspirated - estimated (pump petrol)
93 HP Turbo up to 1 Bar Boost - estimated (pump petrol)
86 HP Turbo up to 2 Bar Boost - estimated (pump petrol)

> Flow Rate - 550cc/min (53lb/hr)
> ORings - 14mm Top / 14mm Bottom
> Electrical Plug - USCAR (Oval)
> Impedance - High
> Oring Top to Bottom / Center to Center without Height Adapter - 53.0mm
> Oring Top to Bottom / Center to Center with 11mm Top Oring Height Adapter - 64.5mm
> Oring Top to Bottom / Center to Center with 11mm Nissan Special Top Oring Height Adapter - 64.5mm
> Oring Top to Bottom / Center to Center with 14mm Top Oring Height Adapter - 64.5mm
> Manufacturer - Bosch PN: 0 280 158 117 (0280158117)

These are 3/4 height so may require height adapter. These use a USCAR type plug P/N H-INJP5 or Bosch converter adapter P/N 852-LOOM3.

from $90.00

(AUD, ex gst)

injector EV14 52 lb/hr 550cc motorsport 3/4 Height
Genuine Bosch Hi Flow Fuel Injector EV14 70 lb/hr 725cc

Genuine Bosch Hi Flow Fuel Injector EV14 70 lb/hr 725cc

THIS INJECTOR IS E85 COMPATIBLE.

139 HP Normally Aspirated - estimated (pump petrol)
121HP Turbo up to 1 Bar Boost - estimated (pump petrol)
111 HP Turbo up to 2 Bar Boost - estimated (pump petrol)

> Flow Rate - 725cc/min (70lb/hr)
> ORings - 14mm Top / 14mm Bottom
> Electrical Plug - USCAR (Oval)
> Impedance - High
> Oring Top to Bottom / Center to Center without Height Adapter - 53.0mm
> Oring Top to Bottom / Center to Center with 11mm Top Oring Height Adapter - 64.5mm
> Oring Top to Bottom / Center to Center with 11mm Nissan Special Top Oring Height Adapter - 64.5mm
> Oring Top to Bottom / Center to Center with 14mm Top Oring Height Adapter - 64.5mm
> Manufacturer - Bosch

These are 3/4 height so may require height adapter. These use a USCAR type plug P/N H-INJP5 or Bosch converter adapter P/N 854-LOOM3.

from $100.00

(AUD, ex gst)

Genuine Bosch Hi Flow Fuel Injector EV14 70 lb/hr 725cc
GSXR 1000 GSXR 600 Hi Flow Injector in 550cc, 725cc and 1000cc

GSXR 1000 GSXR 600 Hi Flow Injector in 550cc, 725cc and 1000cc

THIS INJECTOR IS E85 COMPATIBLE.

Modified Genuine Bosch Injector 550cc, 725cc and 1000cc for Direct Fit/Replacement on Suzuki GSXR1000 and Suzuki GSXR600.

550/725/1000cc
107/139/194HP Normally Aspirated - estimated (pump petrol)
93/121/168HP Turbo up to 1 Bar Boost - estimated (pump petrol)
86/111/155HP Turbo up to 2 Bar Boost - estimated (pump petrol)

> Flow Rate - 550/725/1000cc/min
> ORings - 14mm Top / 14mm Bottom
> Electrical Plug - Bosch EV14 (USCAR)
> Impedance - High
> Manufacturer - Bosch

from $145.00

(AUD, ex gst)

GSXR 1000 GSXR 600 Hi Flow Injector in 550cc, 725cc and 1000cc
Injector E14 95 ib/hr 1000cc Full Height

Injector E14 95 ib/hr 1000cc Full Height

sku: 851-1000L

THIS INJECTOR IS E85 COMPATIBLE.

194 HP Normally Aspirated - estimated (pump petrol)
168 HP Turbo up to 1 Bar Boost - estimated (pump petrol)
155 HP Turbo up to 2 Bar Boost - estimated (pump petrol)

> Flow Rate - 1000cc/min (95lb/hr)
> ORings - 14mm Top / 14mm Bottom
> Electrical Plug - Bosch EV14 (USCAR)
> Impedance - High
> Oring Top to Bottom / Center to Center - 64.5mm
> Manufacturer - Bosch

These are full height. These use a USCAR type plug P/N H-INJP5 or Bosch converter adapter P/N 854-LOOM3.

$120.00

(AUD, ex gst)

Injector E14 95 ib/hr 1000cc Full Height
Injector EV14 1/2 Height 1000cc

Injector EV14 1/2 Height 1000cc

Bosch Injector with Modified Metering Cage to flow 1000cc/min.

THIS INJECTOR IS E85 COMPATIBLE.

187 HP Normally Aspirated - estimated (pump petrol)
147 HP Turbo up to 1 Bar Boost - estimated (pump petrol)
136 HP Turbo up to 2 Bar Boost - estimated (pump petrol)

> Flow Rate - 1000cc/min (94Lb/Hr) @3.0Bar
> ORings - 14mm Top / 14mm Bottom
> Electrical Plug - USCAR (Oval)
> Impedance - 12.0 Ohms (High)
> Oring Top to Bottom / Center to Center without Height Adapter - 38.0mm
> Oring Top to Bottom / Center to Center with 11mm Top Oring Height Adapter - 64.5mm
> Oring Top to Bottom / Center to Center with 14mm Top Oring Height Adapter - 64.5mm
> Manufacture - Bosch

Suits GM LS3 engine.

$120.00

(AUD, ex gst)

Injector EV14 1/2 Height 1000cc
injector EV14 95 lb/hr 1000cc B95/200/3.0H

injector EV14 95 lb/hr 1000cc B95/200/3.0H

  THIS INJECTOR IS E85 COMPATIBLE.  

194 HP Normally Aspirated - estimated (pump petrol)
168 HP Turbo up to 1 Bar Boost - estimated (pump petrol)
155 HP Turbo up to 2 Bar Boost - estimated (pump petrol)

> Flow Rate - 1000cc/min (95lb/hr)
> ORings - 14mm Top / 14mm Bottom
> Electrical Plug - Bosch EV14 (USCAR)
> Impedance - High
> Oring Top to Bottom / Center to Center without Height Adapter - 53.0mm
> Oring Top to Bottom / Center to Center with 11mm Top Oring Height Adapter - 64.5mm
> Oring Top to Bottom / Center to Center with 11mm Nissan Special Top Oring Height Adapter - 64.5mm
> Oring Top to Bottom / Center to Center with 14mm Top Oring Height Adapter - 64.5mm
> Manufacturer - Bosch

These are 3/4 height so may require height adapter PN 851-001 or 851-002. These use a USCAR type plug P/N H-INJP5 or Bosch converter adapter P/N 854-LOOM3.

from $110.00

(AUD, ex gst)

injector EV14 95 lb/hr 1000cc B95/200/3.0H
Genuine Bosch 1150cc @ 4 bar 970cc @ 3 bar Injector with Extended Nose

Genuine Bosch 1150cc @ 4 bar 970cc @ 3 bar Injector with Extended Nose

sku: 851-1150E

EV14 Half Height Extended Nose Injector.

THIS INJECTOR IS E85 COMPATIBLE.

157 HP Normally Aspirated (0.6 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Pressure) - estimated (pump petrol)
131 HP Turbo (0.6 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Pressure) up to 1 Bar Boost - estimated (pump petrol)
121 HP Turbo (0.65 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Presure) up to 2 Bar Boost - estimated (pump petrol)

> Flow Rate - 980cc/min (92.5Lb/Hr) @ 3.0Bar 1150cc (109.5 Lb/Hr) @4 Bar
> ORings - 14mm Top / 14mm Bottom
> Electrical Plug - Bosch (Square)
> Impedance - 12.0 Ohms (High)
> Spray Pattern - Split Cone
> Oring Top to Bottom / Center to Center - 38.0mm
> Manufacture - Bosch - Part Number 0 280 158 040 (0280158040)

$100.00

(AUD, ex gst)

Genuine Bosch 1150cc @ 4 bar 970cc @ 3 bar Injector with Extended Nose
Genuine Bosch 1150cc @ 4 bar 970cc @ 3 bar Injector Extended Nose with Lower Adapter

Genuine Bosch 1150cc @ 4 bar 970cc @ 3 bar Injector Extended Nose with Lower Adapter

sku: 851-1150EA

EV14 Half Height Extended Nose Injector.

THIS INJECTOR IS E85 COMPATIBLE.

157 HP Normally Aspirated (0.6 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Pressure) - estimated (pump petrol)
131 HP Turbo (0.6 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Pressure) up to 1 Bar Boost - estimated (pump petrol)
121 HP Turbo (0.65 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Presure) up to 2 Bar Boost - estimated (pump petrol)

> Flow Rate - 980cc/min (92.5Lb/Hr) @ 3.0Bar 1150cc (109.5 Lb/Hr) @4 Bar
> ORings - 14mm Top / 14mm Bottom
> Electrical Plug - Bosch (Square)
> Impedance - 12.0 Ohms (High)
> Spray Pattern - Split Cone
> Oring Top to Bottom / Center to Center - 53.0mm
> Manufacture - Bosch - Part Number 0 280 158 040

$110.00

(AUD, ex gst)

Genuine Bosch 1150cc @ 4 bar 970cc @ 3 bar Injector Extended Nose with Lower Adapter
Genuine Bosch 1150cc @ 4 bar 970cc @ 3 bar Injector Full Length wth 11mm Upper and 14mm Lower Adapter

Genuine Bosch 1150cc @ 4 bar 970cc @ 3 bar Injector Full Length wth 11mm Upper and 14mm Lower Adapter

sku: 851-1150EA-11P

EV14 Full Height Extended Nose Injector with Lower and Upper Adapters. 11mm Top and 14mm Bottom Orings.

THIS INJECTOR IS E85 COMPATIBLE.

157 HP Normally Aspirated (0.6 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Pressure) - estimated (pump petrol)
131 HP Turbo (0.6 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Pressure) up to 1 Bar Boost - estimated (pump petrol)
121 HP Turbo (0.65 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Presure) up to 2 Bar Boost - estimated (pump petrol)

> Flow Rate - 980cc/min (92.5Lb/Hr) @ 3.0Bar 1150cc (109.5 Lb/Hr) @4 Bar
> ORings - 11mm Top / 14mm Bottom
> Electrical Plug - Bosch (Square)
> Impedance - 12.0 Ohms (High)
> Spray Pattern - Split Cone
> Oring Top to Bottom / Center to Center - 53.0mm
> Manufacture - Bosch - Part Number 0 280 158 040

$122.00

(AUD, ex gst)

Genuine Bosch 1150cc @ 4 bar 970cc @ 3 bar Injector Full Length wth 11mm Upper and 14mm Lower Adapter
Genuine Bosch 1150cc @ 4 bar 970cc @ 3 bar Injector Full Length wth 14mm Upper and 14mm Lower Adapter

Genuine Bosch 1150cc @ 4 bar 970cc @ 3 bar Injector Full Length wth 14mm Upper and 14mm Lower Adapter

sku: 851-1150EA-14P

EV14 Full Height Extended Nose Injector with Lower and Upper Adapters. 14mm Top and 14mm Bottom Orings.

THIS INJECTOR IS E85 COMPATIBLE.

157 HP Normally Aspirated (0.6 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Pressure) - estimated (pump petrol)
131 HP Turbo (0.6 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Pressure) up to 1 Bar Boost - estimated (pump petrol)
121 HP Turbo (0.65 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Presure) up to 2 Bar Boost - estimated (pump petrol)

> Flow Rate - 980cc/min (92.5Lb/Hr) @ 3.0Bar 1150cc (109.5 Lb/Hr) @4 Bar
> ORings - 14mm Top / 14mm Bottom
> Electrical Plug - Bosch (Square)
> Impedance - 12.0 Ohms (High)
> Spray Pattern - Split Cone
> Oring Top to Bottom / Center to Center - 53.0mm
> Manufacture - Bosch - Part Number 0 280 158 040

$122.00

(AUD, ex gst)

Genuine Bosch 1150cc @ 4 bar 970cc @ 3 bar Injector Full Length wth 14mm Upper and 14mm Lower Adapter
injector 1/2 height 1370cc @ 4Bar / 1140cc @ 3Bar

injector 1/2 height 1370cc @ 4Bar / 1140cc @ 3Bar

sku: 851-1370E

EV14 Half Height Extended Nose Injector with optional Injector Height Adapters with either 11mm or 14mm top orings to suit your fuel rail.

THIS INJECTOR IS E85 COMPATIBLE.

220 HP Normally Aspirated (0.6 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Pressure) - estimated (pump petrol)
174 HP Turbo (0.6 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Pressure) up to 1 Bar Boost - estimated (pump petrol)
160 HP Turbo (0.65 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Presure) up to 2 Bar Boost - estimated (pump petrol)

> Flow Rate - 1140cc/min (120Lb/Hr) @ 3.0Bar 1370cc (143 Lb/Hr) @4 Bar
> ORings - 14mm Top / 14mm Bottom
> Electrical Plug - Bosch (Oval)
> Impedance - 12.0 Ohms (High)
> Spray Pattern - Split Cone
> Oring Top to Bottom / Center to Center without Height Adapter - 38.0mm
> Oring Top to Bottom / Center to Center with 11mm Top Oring Height Adapter - 64.5mm
> Oring Top to Bottom / Center to Center with 14mm Top Oring Height Adapter - 64.5mm
> Manufacture - Bosch

$120.00

(AUD, ex gst)

injector 1/2 height 1370cc @ 4Bar / 1140cc @ 3Bar
Genuine Bosch 1650cc Fuel Injector - unmodified -0280158333 - 0280158334

Genuine Bosch 1650cc Fuel Injector - unmodified -0280158333 - 0280158334

sku: 851-1650

EV14 Half Height Injector. You can use adapters with either 11mm or 14mm top orings to suit your fuel rail. Bosch Number 0280158333 & ASNU Number 0280158334

THIS INJECTOR IS E85 COMPATIBLE.

252 HP Normally Aspirated (0.53 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Pressure) - estimated (pump petrol)
222 HP Turbo (0.6 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Pressure) up to 1 Bar Boost - estimated (pump petrol)
205 HP Turbo (0.65 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Presure) up to 2 Bar Boost - estimated (pump petrol)

> Flow Rate - 1650cc/min (157Lb/Hr) @ 3.0Bar
> ORings - 14mm Top / 14mm Bottom
> Electrical Plug - Bosch (Square)
> Impedance - 8.4 Ohms
> Spray Pattern - Narrow
> Oring Top to Bottom / Center to Center without Height Adapter - 38.0mm
> Oring Top to Bottom / Center to Center with 11mm Top Oring Height Adapter - 64.5mm
> Oring Top to Bottom / Center to Center with 14mm Top Oring Height Adapter - 64.5mm
> Manufacture - Bosch - Part Number 0 280 158 333

$210.00

(AUD, ex gst)

Genuine Bosch 1650cc Fuel Injector - unmodified -0280158333 - 0280158334
Injector Height Adapter 14mm to 11mm 1/2 Height Premium Kit

Injector Height Adapter 14mm to 11mm 1/2 Height Premium Kit

sku: 851-11LP

Injector Height Adapters are commonly used to allow you to fit shorter injectors into fuel rail setup that originally had long injectors.

Injector Top Oring - 14mm
Fuel Rail Outlet - 11mm

$12.00

(AUD, ex gst)

Injector Height Adapter 14mm to 11mm 1/2 Height Premium Kit
Injector Height Adapter 14mm to 11mm 3/4 Height Premium Kit

Injector Height Adapter 14mm to 11mm 3/4 Height Premium Kit

sku: 851-11SP

Injector Height Adapters are commonly used to allow you to fit shorter injectors into fuel rail setup that originally had long injectors.

Injector Top Oring - 14mm
Fuel Rail Outlet - 11mm
Note For adapters to suit Nissan Fuel Rails use part number 851-11SPNIS

$12.00

(AUD, ex gst)

Injector Height Adapter 14mm to 11mm 3/4 Height Premium Kit
Injector Height Adapter 14mm to 14mm 1/2 Height Premium Kit

Injector Height Adapter 14mm to 14mm 1/2 Height Premium Kit

sku: 851-14LP

Injector Height Adapters are commonly used to allow you to fit shorter injectors into fuel rail setup that originally had long injectors.

Injector Top Oring - 14mm
Fuel Rail Outlet - 14mm

$12.00

(AUD, ex gst)

Injector Height Adapter 14mm to 14mm 1/2 Height Premium Kit
Injector Height Adapter 14mm to 14mm 3/4 Height Premium Kit

Injector Height Adapter 14mm to 14mm 3/4 Height Premium Kit

sku: 851-14SP

Injector Height Adapters are commonly used to allow you to fit shorter injectors into fuel rail setup that originally had long injectors.

Injector Top Oring - 14mm
Fuel Rail Outlet - 14mm

$12.00

(AUD, ex gst)

Injector Height Adapter 14mm to 14mm 3/4 Height Premium Kit