We ship anywhere in Australia and World Wide
Mon-Fri 8:00 - 5:30
Your cart has 0 item(s) |
Home / Motorsport Sensors / Temperature Sensors Connectors Adapters / Temprature Sensor Adapters
Sort: Product NamePriceCode
Aluminum 1/8 BSP Weld on Boss.
Ideal for welding onto thin inter cooler piping to mount a Motorsport Air Temperature Sensor
$7.50
(AUD, ex gst)
This Aluminium Weld On boss suits Bosch Coolant Temperature Sensor 0280130026.
Suits other applications where an M12 x 1.5mm thread is required.
$15.00
(AUD, ex gst)
Coolant Temperature Sensor Adapter to adapt a Bosch Sensor with 12 x 1.5 thread to 3/8" BSP male thread.
$16.00
(AUD, ex gst)
Coolant Temperature Sensor Adapter to adapt a Bosch Sensor with 12 x 1.5 thread to 3/8" NPT male thread.
$16.00
(AUD, ex gst)
Exhaust pyrometer boss 1/4" OD - 1/8"NPTF ID standard thread. Mild steel unplated for welding into primary and tail pipes for use with exhaust temperature pyrometer using a 1/8 NPT thread.
$7.00
(AUD, ex gst)
Exhaust pyrometer boss 1/4" OD - 1/8"NPTF ID standard thread. This model has a step to assist in in placement and welding. Mild steel unplated for welding into primary and tail pipes for use with exhaust temprature pyrometer using a 1/8 NPT thread.
$6.50
(AUD, ex gst)
Exhaust temp pyrometer ferrel aluminium weld on 1/8" BSP.
$6.00
(AUD, ex gst)
Stainless Steel Exhaust Temperature Pyrometer Ferrel with 1/8" BSP thread.
$15.00
(AUD, ex gst)
Fuel Pressure and Temperature Manifold Includes Bosch sensor H-PS150+AT-B (Bosch Number 0261230340 ) and electrical connector.
Inlet / Outlet -8 AN ORB ports to suit Earls and Speed flow AN fittings Includes Stainless Steel Mounting Hardware, Bosch pressure and temperature sensor and electrical connector.
Easy fit up and neat installation for both fluid Pressure and temperature compatible with Diesel, gasoline, E85, water, engine oil, transmission oil. Pressure rang 0-145 PSI (10BAR) Temperature -40-140 deg C
Easy fit up and neat installation for both fluid Pressure and temperature compatible with Diesel, gasoline, E85, water, engine oil, transmission oil. Pressure rang 0-145 PSI (10BAR) Temperature -40-140 deg C
$225.00
(AUD, ex gst)
This manifold has one 1/8 NPT thread for the pressure and one M12 x 1.5 to suit a Bosch temperature sensor.
The ends of the manifold are machined to accept -8 Oring port fittings.
$85.00
(AUD, ex gst)
This manifold has one 1/8 NPT thread for the pressure and one M12 x 1.5 to suit a Bosch temperature sensor.
The ends of the manifold are machined to accept -8 Oring port fittings.
Sensors Supplied:
H-PS100G-H - Honeywell Pressure Sensor and Connector
H-WTB - Bosch Temperature Sensor and Connector
$340.00
(AUD, ex gst)