We ship anywhere in Australia and World Wide
Mon-Fri 8:00 - 5:30
Your cart has 0 item(s) |
Home / Fuel System Parts / Fuel Injectors, Bosch Fuel injectors / Fuel Injector Parts
EFI Hardware can supply all types of fuel injector replacement parts: Pintle Caps, O-Rings, Buffer Seals, and more.
Sort: Product NamePriceCode
These stainless steel fuel injector oring adapters convert standard injectors with 14mm top orings, into barb type injectors.
Includes Stainless steel retaining clip
** Fuel injector not included**
***IMPORTANT** Please ensure that the fuel rail is also mounted to hold down the injector hoses and adapting caps as well. This is extremely important as it will be a secondary means to ensure that the adapting caps do not disengage in the result of a retaining clip failing or disengaging from vibration.
***These should not be used as the only mounting method.***
$30.00
(AUD, ex gst)
This tool provides a quick and easy way to extract the filter basket from the top of most top feed fuel injectors.
$15.00
(AUD, ex gst)
Square section seal 5.6mm thick X 16.2 OD X 9.2 ID.
3.5 cord.
$2.00
(AUD, ex gst)
8.6mm ID,
14.35 OD,
4.7mm Thick.
Lower Injector seal. Suits Nissan, Jaguar and other hose tail type injectors as well as RB26DETT & CA18DE.
$2.00
(AUD, ex gst)
$2.00
(AUD, ex gst)
$2.00
(AUD, ex gst)
$2.00
(AUD, ex gst)
This Fuel Injector Port Plug is designed to fit into and seal a manifold or throttle body Injector Port with a 14mm Oring.
$10.00
(AUD, ex gst)
This Injector Retaining Clip retains injector the fuel rails and adapters.
NOTE: There must be the correct groove on the injector and the correct lip on the fuel rail or injector adapter.
$4.00
(AUD, ex gst)
$2.00
(AUD, ex gst)
This is a full service kit, 1 pack services one (1) injector.
KIT CONTAINS:
1 x Upper O-Ring
1 x Lower O-Ring
1 x Fuel Filter
1 x Lower Spacer
1 x Pintle Cap
APPLICATIONS:
Nissan SR20DE
Nissan SR20DET
Nissan VG30DE (Z32 1/94 to 8/96)
Nissan KA24DE (U13 6/93 to 3/97)
Nissan RB25DET (Not R34)
NOTE: Does not include fuel injector
from $12.30
(AUD, ex gst)
For use with 14mm oring injectors. Retains the injector to the fuel rail. For use on fuel rail extrusion P/N 825-000 or fuel rails with 18.5mm wide flat section. Note This should not be used by its self in external injector (our side ram tube / velocity stack)
use part numbers 825-030, 825-031 or 8250-020
$6.50
(AUD, ex gst)