Home  /  EFI Parts  /  Air Filters / Air Boxes/ Catch Cans  /  Air Boxes

Air Boxes

air boxes


Sort: Product NamePriceCode

Air Box Pro-Street 4 Cyl for Carburettor

Air Box Pro-Street 4 Cyl for Carburettor

sku: 835-033

This Pro Series Air Box has a 100mm (4") inlet that will allow even the most powerful NA 4 Cylinder Carbureted engines to breath freely.

The low profile base gives the most clearance for other items in your engine bay including brake boosters and strut towers.

$350.00

(AUD, ex gst)

Air Box Pro-Street 4 Cyl for Carburettor
Air Box Pro-Street 4 Cyl for Fuel Injection

Air Box Pro-Street 4 Cyl for Fuel Injection

sku: 835-032

This Pro Series Air Box has a 100mm (4") inlet that will allow even the most powerful NA 4 Cylinder Fuel Injected engines to breath freely.

A taller "v" shaped base gives clearance for your fuel rails and injectors.

$370.00

(AUD, ex gst)

Air Box Pro-Street 4 Cyl for Fuel Injection
Air Box Suit Carbs - 4 Cylinder Twin 4" Inlet With Shallow Base

Air Box Suit Carbs - 4 Cylinder Twin 4" Inlet With Shallow Base

sku: 835-033-TWIN

This Pro Series Air Box has 2 x 100mm (4") inlets that will allow even the most powerful NA 4 Cylinder or 20B Rotary Carbureted engines to breath freely.

The low profile base gives the most clearance for other items in your engine bay including brake boosters and strut towers.

$390.00

(AUD, ex gst)

Air Box Suit Carbs - 4 Cylinder Twin 4" Inlet With Shallow Base
Air Box suit ITB's 4 Cylinder Twin 4" Inlet with Deep Base

Air Box suit ITB's 4 Cylinder Twin 4" Inlet with Deep Base

sku: 835-032-TWIN

This Pro Series Air Box has 2 x 100mm (4") inlets that will allow even the most powerful NA 4 Cylinder Fuel Injected engines or 20B Triple Rotor to breath freely.

A taller "v" shaped base gives clearance for your fuel rails and injectors.

$420.00

(AUD, ex gst)

Air Box suit ITB's 4 Cylinder Twin 4" Inlet with Deep Base
Power Bulge Air Filter - 4 Cylinder Kit - Including K&N Filter

Power Bulge Air Filter - 4 Cylinder Kit - Including K&N Filter

sku: 835-470

This kit is available to suit 40mm , 45mm, 48mm and 50mm Throttle Body Inlet Sizes.
This Kit does not include ram tubes (velocity stacks) POA

$600.00

(AUD, ex gst)

Power Bulge Air Filter - 4 Cylinder Kit - Including K&N Filter
cold air box 4 cylinder wide base

cold air box 4 cylinder wide base

sku: 835-022

Air Box for 4 cylinder side draft throttle bodies and carburetors. Improves mid range torque. Can also substantially reduce air intake temps by ducting intake to outside of the engine bay for further power gains.
Separate base and lid with 100mm entry. Fits up to 4" scatt hose - 835-070 & tapered unifilter air sock - 835-050 not included. Drastically reduces Induction noise.
Dimensions 47cm long 16cm at widest point (90mm wide at the base) and 14.5cm tall (same measured angle as throttle body/carburetor throat) Fitting kit supplied includes rubber seal for fitting between the 2 half's and rivnuts.
Base is blank and requires holes to be cut to suit your throttle body / carburetor spacing. This can be done as an additional service - cost is $70.00 plus GST
Suits toyota 4 age 20 Valve applications (silver top only)

$180.00

(AUD, ex gst)

cold air box 4 cylinder wide base
cold air box 6 cylinder fibreglass

cold air box 6 cylinder fibreglass

sku: 835-025

Air Box for 6 cylinder side draft throttle bodies and carburetors. Improves mid range torque. Can also substantially reduce air intake temps by ducting intake to outside of the engine bay for further power gains.
Separate base and lid with 100mm entry. Fits up to 4" scatt hose - 835-070 & tapered unifilter air sock - 835-050 not included. Drastically reduces Induction noise.
Dimensions; 60cm long 16cm wide and 15.5cm tall (same measured angle as throttle body/carburetor throat) Fitting kit supplied includes rubber seal for fitting between the 2 half's and rivnuts.
Base is blank and requires holes to be cut to suit your throttle body / carburetor spacing. This can be done as an additional service - cost is $85.00 plus GST

$200.00

(AUD, ex gst)

cold air box 6 cylinder fibreglass
air box Mazda rotary IDA Weber, with latches and seal

air box Mazda rotary IDA Weber, with latches and seal

sku: 835-029

For Weber IDA carburettor and some IDA throttle bodies on rotary egine applications. Base is not drilled as orientation of manifolds, bores and bolt holes can differ.

 CLICK HERE TO SEE ONE OF OUR AIRBOXES FITTED TO ALLAN MOFFAT'S GROUP-C RX-7 

$280.00

(AUD, ex gst)

air box Mazda rotary IDA Weber, with latches and seal
air box Mazda RX with IDA weber

air box Mazda RX with IDA weber

sku: 835-029F

Air box rotary IDA Carburettor. Fibreglass separate top and base (no latches or seal) with 130mm diameter inlet. For Weber IDA carburettor and some IDA throttle bodies on rotary egine applications. Base is not drilled as orientation of manifolds, bores and bolt holes can differ.

 CLICK HERE TO SEE ONE OF OUR AIRBOXES FITTED TO ALLAN MOFFAT'S GROUP-C RX-7 

$190.00

(AUD, ex gst)

air box Mazda RX with IDA weber
scatt hose orange 100mm diam (Per/30cm)

scatt hose orange 100mm diam (Per/30cm)

sku: 835-070

Silicone, smooth internally for minimum air flow disruption.

$35.00

(AUD, ex gst)

scatt hose orange 100mm diam (Per/30cm)
scatt hose silicone 75mm per 30cm

scatt hose silicone 75mm per 30cm

sku: 835-071

Scat high temperature silicone hose is perfect for intake engine air, brake or cabin ducting.

This hose is sold on a per 30cm basis.

$30.00

(AUD, ex gst)

scatt hose silicone 75mm per 30cm