Home  /  EFI Parts  /  Manifolds and Adapters  /  Manifold Hardware

Manifold Hardware


Sort: Product NamePriceCode

20B ITB Alloy Weld On Flange - 50mm 130/160 Spacing

20B ITB Alloy Weld On Flange - 50mm 130/160 Spacing

sku: 840-018-50

20B weld on flange with 55mm bores. CNC machined 6060 T5 Aluminum. Bolt holes are pilot holes ready to tap M8 or 5/16" after welding.

This flange is specifically designed to suit our 20B ITB Kit 805-005

$80.00

(AUD, ex gst)

20B ITB Alloy Weld On Flange - 50mm 130/160 Spacing
20B ITB Flange - 55mm 130/160 Spacing

20B ITB Flange - 55mm 130/160 Spacing

sku: 840-018-55

20B weld on flange with 55mm bores. CNC machined 6060 T5 Aluminum. Bolt holes are pilot holes ready to tap M8 or 5/16" after welding.

This flange is specifically designed to suit our 20B ITB Kit 805-006

$80.00

(AUD, ex gst)

20B ITB Flange - 55mm 130/160 Spacing
nut 8 x 1.25mm with 10mm hex

$4.00

(AUD, ex gst)

nut 8 x 1.25mm with 10mm hex
nuts 5/16" UNF hex

nuts 5/16" UNF hex

sku: 845-055

$0.20

(AUD, ex gst)

nuts 5/16" UNF hex
stud  M8 x 1.25 x 25mm hex end

$4.00

(AUD, ex gst)

stud  M8 x 1.25 x 25mm hex end
stud  M8 x 1.25 x 30mm hex end

$2.40

(AUD, ex gst)

stud  M8 x 1.25 x 30mm hex end
stud  M8 x 1.25 x 38mm long

$1.10

(AUD, ex gst)

stud  M8 x 1.25 x 38mm long
stud 5/16"unf x 5/16"w x 1.1/4

stud 5/16"unf x 5/16"w x 1.1/4

sku: 845-050

Standard manifold studs to suit most manifolds to fit up our range of throttle bodies 1.25" long 5/16 witworth (manifold side) 5/16 UNF throttle body side

$2.50

(AUD, ex gst)

stud 5/16"unf x 5/16"w x 1.1/4
DCOE mounting flange 40,45,48,50mm Sizes

DCOE mounting flange 40,45,48,50mm Sizes

sku: 840-005

Flange for fabricating manifolds for DCOE series throttle bodies or weber, solex & dellorto side draft carburettors.
Available with bores sizes 40,45,48 or 50mm diameter. CNC machined 6060 T5 Aluminum. Bolt holes are pilot holes ready to tap M8 or 5/16" after welding, flange is 9.8mm thick.

$40.00

(AUD, ex gst)

DCOE mounting flange 40,45,48,50mm Sizes
IDA mounting flange 50mm bore

IDA mounting flange 50mm bore

sku: 840-010

Flange for fabricating manifolds for IDA series throttle bodies or Weber side down draft carburetors
with 55mm bores. CNC machined 6060 T5 Aluminum. Bolt oles are pilot holes ready to tap M8 or 5/16" after welding.

$50.00

(AUD, ex gst)

IDA mounting flange 50mm bore
IDA mounting flange 55mm bore

IDA mounting flange 55mm bore

sku: 840-011

Flange for fabricating manifolds for IDA series throttle bodies or Weber side down draft carburetors
with 55mm bores. CNC machined 6060 T5 Aluminum. Bolt oles are pilot holes ready to tap M8 or 5/16" after welding.

$50.00

(AUD, ex gst)

IDA mounting flange 55mm bore
20B weld on flange 50mm bores with 120mm centres

20B weld on flange 50mm bores with 120mm centres

sku: 840-013

20B weld on flange with 50mm bores. CNC machined 6060 T5 Aluminum. Bolt oles are pilot holes ready to tap M8 or 5/16" after welding.

$80.00

(AUD, ex gst)

20B weld on flange 50mm bores with 120mm centres
20B weld on flange 55mm bores with 120mm centres

20B weld on flange 55mm bores with 120mm centres

sku: 840-014

20B Weld On Flange with 55mm bores and 120mm Centers 20B weld on flange with 50mm bores. CNC machined 6060 T5 Aluminum. Bolt oles are pilot holes ready to tap M8 or 5/16" after welding.

$80.00

(AUD, ex gst)

20B weld on flange 55mm bores with 120mm centres
20B weld on flange 50mm bores with 120mm/150mm centres

20B weld on flange 50mm bores with 120mm/150mm centres

sku: 840-015

A 20B weld on flange 50mm bores with 120mm centers between front and center rotor housings, and 150mm centers between center and rear rotor housings. 20B weld on flange with 50mm bores. CNC machined 6060 T5 Aluminum. Bolt oles are pilot holes ready to tap M8 or 5/16" after welding.

$80.00

(AUD, ex gst)

20B weld on flange 50mm bores with 120mm/150mm centres
20B weld on flange 55mm bores with 120mm/150mm centres

20B weld on flange 55mm bores with 120mm/150mm centres

sku: 840-016

A 20B weld on flange 55mm bores with 120mm centers between front and center rotor housings, and 150mm centers between center and rear rotor housings. 20B weld on flange with 50mm bores. CNC machined 6060 T5 Aluminum. Bolt oles are pilot holes ready to tap M8 or 5/16" after welding.

$80.00

(AUD, ex gst)

20B weld on flange 55mm bores with 120mm/150mm centres
Map sensor collector kit 4 cyl inc hose for equal length connection

Map sensor collector kit 4 cyl inc hose for equal length connection

sku: H-MAPCOL4

Map Sensor collector kit for 4 cylinder with individual throttle bodies.


Having equal length hoses ensures each vacuum pulse arrives at the collector so the map sensor can pick up the vacuum signals at the correctly timed intervals. Just like a tuned set of exhaust headers requires all the same length primary pipes to the collector to provide proper operation.

This kit includes 4 x M6 stainless steel vacuum nipples to be fitted to each intake runner.
The hose supplied has enough length to have four equal length vacuum hoses from each of the intake runners to the supplied collector with 3.5 metres spare for connection to the MAP Sensor.

$110.00

(AUD, ex gst)

Map sensor collector kit 4 cyl inc hose for equal length connection
Map sensor collector kit 6 cyl inc hose for equal length connection

Map sensor collector kit 6 cyl inc hose for equal length connection

sku: H-MAPCOL6

Map Sensor collector kit for 6 cylinder with individual throttle bodies.

This kit includes 6 x M6 stainless steel vacuum nipples to be fitted to each intake runner.
The hose supplied has enough length to have six equal length vacuum hoses from each of the intake runners to the supplied collector with 4.5 metres spare for connection to the MAP Sensor.

Having equal length hoses ensures each vacuum pulse arrives at the collector so the map sensor can pick up the vacuum signals at the correctly timed intervals. Just like a tuned set of exhaust headers requires all the same length primary pipes to the collector to provide proper operation.

$138.00

(AUD, ex gst)

Map sensor collector kit 6 cyl inc hose for equal length connection
Map sensor collector kit 8 cyl inc hose for equal length connection

Map sensor collector kit 8 cyl inc hose for equal length connection

sku: H-MAPCOL8

Map Sensor collector kit for 8 cylinder with individual throttle bodies.

This kit includes 8 x M6 stainless steel vacuum nipples to be fitted to each intake runner.
The hose supplied has enough length to have 8 equal length vacuum hoses from each of the intake runners to the supplied collector with 5 metres spare for connection to the MAP Sensor.

Having equal length hoses ensures each vacuum pulse arrives at the collector so the map sensor can pick up the vacuum signals at the correctly timed intervals. Just like a tuned set of exhaust headers requires all the same length primary pipes to the collector to provide proper operation.

$160.00

(AUD, ex gst)

Map sensor collector kit 8 cyl inc hose for equal length connection