Injector Mounts and Bosses

Injector Adapter - Mazda 13B Injector Lower Primary

sku: 860-013MAZL

This Mazda 13B Primary Injector Lower Adapter adapts injectors with a 14mm lower injector oring into the original Primary Injectors injector holes in the housing.

Injector Adapter - Mazda 13B Secondary Injector

sku: 860-013MAZS

This Mazda 13B Secondary Injector Lower Adapter adapts injectors with a 14mm lower injector oring into the original Secondary Injectors injector hole in the housing.

injector port plug short

sku: 860-008

This Fuel Injector Port Plug is designed to fit into and seal a manifold or throttle body Injector Port with a 14mm Oring.

Screw in External Injector Mount to suit 1/2 Height 3/4 Height and Full Height

This screw-in mount is used to mount an injector without the need for a fuel rail.

This can be used for center point, multi point applications or as an additional injector, it could deliver a 2nd fuel such as Methanol, or simply used to deliver extra fuel when your engine is boosted.

NOTE: Injector and Black Fuel Fitting are Not Included with This Product.

Weld in External Injector Mount to suit 1/2 Height 3/4 Height and Full Height

This weld-in mount is used to mount an injector without the need for a fuel rail.

This can be used for center point, multi point applications or as an additional injector, it could deliver a 2nd fuel such as Methanol, or simply used to deliver extra fuel when your engine is boosted.

NOTE: Injector and Black Fuel Fitting are Not Included with This Product.

Billet External Injector Mount - Short

sku: 825-030

You can use this mount to to mount Bosch EV14 1/2 height injectors.

Supplied with Special Oring to suit the Injector Mount.

Stainless Steel M5 Mounting Screws pre-drilled to receive lock-wire for added security.

NOTE: Fuel Rail Not Included

Injector Boss Small Aluminium Weld In

sku: 860-011

Aluminium machined small injector bosses. Ready to weld into place and suit most top feed style injectors with 14mm bottom oring.

Injector-Boss-Small-Steel-Weld-In

sku: 860-011S

Steel machined injector bosses. Ready to weld into place and suit most top feed style injectors with 14mm bottom orings.

injector boss alloy weld on

sku: 860-010

Aluminium machined injector bosses. Ready to weld into place and suit most top feed style injectors with 14mm bottom oring.

injector boss steel weld on

sku: 860-010S

Steel machined injector bosses. Ready to weld into place and suit most top feed style injectors with 14mm bottom orings.

Injector Boss Screw In Aluminium

sku: 860-012A

This Screw-In Aluminium Injector Boss is supplied with an oring to seal into your manifold. Thread is 14mm x 1.25 pitch

It accepts fuel injectors with 14mm bottom orings.

Injector Boss Steel Screw In

sku: 860-012S

This Screw-In Steel Injector Boss is supplied with an oring to seal into your manifold. 14 x 1.25 Thread

It accepts fuel injectors with 14mm bottom orings.

Injector Boss - Weld In - Aluminium - Large

sku: 860-016

injector boss alloy O ring seal

sku: 860-013

Injector boss with seal requires no welding or glueing in

injector retaining clip

sku: 825-000C

For use with 14mm oring injectors. Retains the injector to the fuel rail. For use on fuel rail extrusion P/N 825-000 or fuel rails with 18.5mm wide flat section. Note This should not be used by its self in external injector (our side ram tube / velocity stack)
use part numbers 825-030, 825-031 or 8250-020