We ship anywhere in Australia and World Wide
THIS INJECTOR IS E85 COMPATIBLE.
56 HP Normally Aspirated - estimated (pump petrol)
46HP Turbo up to 1 Bar Boost - estimated (pump petrol)
43 HP Turbo up to 2 Bar Boost - estimated (pump petrol)
> Flow Rate - 347cc/min (33lb/hr)
> Spray Pattern - 22 Degree Cone
> ORings - 14mm Top / 14mm Bottom
> Electrical Plug - Bosch EV1
> Impedance - 12 Ohms (High)
> Oring Top to Bottom / Center to Center without Height Adapter - 38.0mm
> Oring Top to Bottom / Center to Center with 11mm Top Oring Height Adapter - 64.5mm
> Oring Top to Bottom / Center to Center with 14mm Top Oring Height Adapter - 64.5mm
> Manufacturer - Bosch
These are 1/2 height so may require height adapter. These use a Bosch EV1 type plug P/N H-INJPB.
|851-14LESP||Injector Adapter Combo for 1/2 Height Extended Nose Injector with 14mm Top Adapter|
|851-11LESP||Injector Adapter Combo for 1/2 Height Extended Nose Injector with 11mm Top Adapter|
|851-14LE||Adapter Lower for Extended Nose Injector|
INJECTOR CONNECTORS TO SUIT:
Replacement injectors are only as good as the wiring, pins and plugs that supply current
and voltage to them.
This is an ideal time to check your injector plugs and pins for signs of pin corrosion, pins
splayed open and crumbling plastic connectors.
If in doubt, it can be cheap insurance to replace your injector connectors with brand new items to ensure positive electrical connections.
|H-INJP||injector plug, pins and seals - No boot|
|H-INJPB2||injector plug with high quality boot|
|852-LOOM2||Bosch Injector To USCAR Loom Adapter|
|852-LOOM4||Bosch Injector To Nissan Loom Adapter|
|852-LOOM6||Bosch Injector To USCAR Loom Adapter - Hard|
|852-LOOM8||Bosch Injector To Denso Loom Adapter|