We ship anywhere in Australia and World Wide
EV14 Full Height Extended Nose Injector with Lower and Upper Adapters. 11mm Top and 14mm Bottom Orings.
THIS INJECTOR IS E85 COMPATIBLE.
157 HP Normally Aspirated (0.6 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Pressure) - estimated (pump petrol)
131 HP Turbo (0.6 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Pressure) up to 1 Bar Boost - estimated (pump petrol)
121 HP Turbo (0.65 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Presure) up to 2 Bar Boost - estimated (pump petrol)
> Flow Rate - 980cc/min (92.5Lb/Hr) @ 3.0Bar 1150cc (109.5 Lb/Hr) @4 Bar
> ORings - 11mm Top / 14mm Bottom
> Electrical Plug - Bosch (Square)
> Impedance - 12.0 Ohms (High)
> Spray Pattern - Split Cone
> Oring Top to Bottom / Center to Center - 53.0mm
> Manufacture - Bosch - Part Number 0 280 158 040
INJECTOR CONNECTORS TO SUIT:
Replacement injectors are only as good as the wiring, pins and plugs that supply current
and voltage to them.
This is an ideal time to check your injector plugs and pins for signs of pin corrosion, pins
splayed open and crumbling plastic connectors.
If in doubt, it can be cheap insurance to replace your injector connectors with brand new items to ensure positive electrical connections.
|H-INJP||injector plug, pins and seals - No boot|
|H-INJPB2||injector plug with high quality boot|
|852-LOOM2||Bosch Injector To USCAR Loom Adapter|
|852-LOOM4||Bosch Injector To Nissan Loom Adapter|
|852-LOOM6||Bosch Injector To USCAR Loom Adapter - Hard|
|852-LOOM8||Bosch Injector To Denso Loom Adapter|