Product Code: 851-14LP
inc GST for Australian CustomersAUD $12.00 (ex GST)
for International Customers
This injector adapter converts a half height injector with a 14mm top oring (38.5mm oring centre to oring centre) to a full height injector (64.5mm oring centre to oring centre) with an 14mm top oring. This version fits to the top of the injector
Injector Top Oring - 14mm
Fuel Rail Outlet - 14mm
If you use full height injectors, you can use them to lift your fuel rail if you need to move it away from modified intake plumbing, electrical wiring, or other engine modifications. If you change your fuel rail position, you will need to change the fuel rail mounting system to accomodate the new position.
This Premium Series Injector Height Adapter Kit contains:
1 x Injector Height Adapter - 28mm Nominal Injector Extension
1 x High Flow Injector Filter Basket
1 x 14mm Oring (Nitrile - E85 Compatible)
1 x Fuel Injector Retaining Clip
Retaining Clip - We've added another layer of piece of mind by including an Injector Retaining Clip. You are able to clip your injector directly into the Injector Height Adapter essentially making the Injector and the Injector Height Adapter into a single unit.
Nitrile Oring - The highest quality Nitrile orings are used to ensure long oring life even when you put your injectors through the rigours of high ethanol fuels such as E85. These orings are E85 compatible.
Radiused Oring Seat - If you have a lot of experience installing injectors, you will have come up against "oring pinch". This is where orings are damaged during installation when the outer edge of the oring seat pinches the oring and in many cases, the oring is cut or torn. We have radiused the internal oring seat to reduce the chance of oring pinch.
High Flow Injector Filter Basket - We know you are going to push your engine either now, or in the future. Using high flow injector filter baskets ensures your injectors are never short changed in the fuel supply department due to low flow injector filter baskets.
Black Anodising - For both beauty and protection, we have anodised your Injector Height Adapters so they look really cool, plus, we keep all of the mating surfaces free from corrosion, so your orings and seals work time after time.