Home  /  Electrical / Electronics  /  Electronics  /  Distributors - EFI  /  Distributor Accessories & Parts

Distributor Accessories & Parts


Sort: Product NamePriceCode

Hall Effect Crankshaft Sensor - High RPM Version

Hall Effect Crankshaft Sensor - High RPM Version

Ideal for 36-1 Trigger Wheels and applications with teeth that are close together.


Minimum Voltage: 4.75V
Maximum Voltage: 24V
Maximum Output Current: 20mA
Maximum Tooth Frequency: 15kHz
Minimum Temperature: -40 C
Maximum Temperature: 125 C
Maximum Air Gap: 1mm-5mm Depending on Supply Voltage
Minimum Trigger Wheel Width: 2mm
Minimum Tooth Width: 2mm
Minimum Tooth Gap Width: 2mm
Minimum Tooth Gap Depth: 2mm

This uses the same body dimensions as the Honeywell GT101 Sensor.

from $120.00

(AUD, ex gst)

Hall Effect Crankshaft Sensor - High RPM Version
distributor connector VT distributor

distributor connector VT distributor

sku: H-DISTVTC

This Plug kit is to connect to factory VT distributor flying lead plug. This the the engine loom side plug half.

$18.00

(AUD, ex gst)

distributor connector VT distributor
VT Commodore Female Distributor Connector

VT Commodore Female Distributor Connector

sku: H-DISTVTCD

Holden VT Commodore V8 Distributor Plug with Female Pins. This Plug kit is a replacement fo factory VT distributor flying lead plug. This the the distributor side plug half.

$18.00

(AUD, ex gst)

VT Commodore Female Distributor Connector
sensor twin hall effect pick up

sensor twin hall effect pick up

sku: H-HALLA

Suits Mitsubishi Magna with Bosch distributor. Also useful to convert a distributor to ref and sync for sequential injection and ignition.

$80.00

(AUD, ex gst)

sensor twin hall effect pick up
sensor twin hall sensor for ref and sync

sensor twin hall sensor for ref and sync

sku: H-HALLB

Twin hall effect sensor element from a VT Commodore Distributor. Can be used to convert other distributors from single pulse, to reference and sync for sequential injection and ignition.

$90.00

(AUD, ex gst)

sensor twin hall sensor for ref and sync
6 Cylinder Billet Sequential Distributor Trigger Cup

6 Cylinder Billet Sequential Distributor Trigger Cup

sku: H-DIST6TRIG

This billet trigger cup is machined in one piece from 1020 steel. It is far stronger than the pressed steel factory ones that can fatigue and break from high RPM or constant gear drive chatter. Part number H-HALLB is the correct hall sensor plate to used in conjunction with the trgger cup. Compatable with GM Holden VT Distributors to convert them to 6 cylinder operation with the appropriate distributor cap and rotor. Out side Diameter is 70mm

$100.00

(AUD, ex gst)

6 Cylinder Billet Sequential Distributor Trigger Cup
8 Cylinder Billet Sequential Distributor Trigger Cup

8 Cylinder Billet Sequential Distributor Trigger Cup

sku: H-DIST8TRIG

This billet trigger cup is machined in one piece from 1020 steel. It is far stronger than the pressed steel factory ones that can fatigue and break from high RPM or constant gear drive chatter. Part number H-HALLB is the correct hall sensor plate to used in conjunction with the trgger cup. Compatable with GM Holden VT Distributors. Out side diameter is 70mm

$110.00

(AUD, ex gst)

8 Cylinder Billet Sequential Distributor Trigger Cup
Billet Cap Option For Converting To Multicoil - Suit All 6 Cylinder and V8 EFI Hardware Sequential Distributors

Billet Cap Option For Converting To Multicoil - Suit All 6 Cylinder and V8 EFI Hardware Sequential Distributors

sku: DISTBCAP6/8

Billet Cap Option For Converting To Multicoil - Suit All 6 Cylinder and V8 EFI Hardware Sequential Distributors

$120.00

(AUD, ex gst)

Billet Cap Option For Converting To Multicoil - Suit All 6 Cylinder and V8 EFI Hardware Sequential Distributors
Distributor Low Profile Cap and Rotor Button

Distributor Low Profile Cap and Rotor Button

sku: H-DISTLOWCAP

Low Profile Distributor Cap and Rotor Button

$190.00

(AUD, ex gst)

Distributor Low Profile Cap and Rotor Button