We ship anywhere in Australia and World Wide

Your cart has 0 item(s)

Home  /  Intake Hardware  /  Hardware Parts  /  Manifold Fabrication Parts

Manifold Fabrication Parts


Sort: Product NamePriceCode

Weld on Flange To suit 82mm Bosch DBW Throttle Body

Weld on Flange To suit 82mm Bosch DBW Throttle Body

sku: 804-082F

Weld on Flange For 82mm Drive By Wire Bosch Throttle Body(0280750473).

Comes Supplied with Viton O-Ring.

CNC Machined from T-6061 Aluminum

$55.00

(AUD, ex gst)

Weld on Flange To suit 82mm Bosch DBW Throttle Body
Weld on Flange To suit 74mm Bosch DBW Throttle Body

Weld on Flange To suit 74mm Bosch DBW Throttle Body

sku: 804-074F

Weld on Flange For 74mm Drive By Wire Bosch Throttle Body(0280750474).

Comes Supplied with Viton O-Ring.

CNC Machined from T-6061 Aluminum

$55.00

(AUD, ex gst)

Weld on Flange To suit 74mm Bosch DBW Throttle Body
Weld on Flange To suit 68mm Bosch DBW Throttle Body

Weld on Flange To suit 68mm Bosch DBW Throttle Body

sku: 804-068F

Weld on Flange For 68mm Drive By Wire Bosch Throttle Body(0280750156).

Comes Supplied with Viton O-Ring.

CNC Machined from T-6061 Aluminum

$55.00

(AUD, ex gst)

Weld on Flange To suit 68mm Bosch DBW Throttle Body
Weld on Flange To suit 60mm Bosch DBW Throttle Body

Weld on Flange To suit 60mm Bosch DBW Throttle Body

sku: 804-060F

Weld on Flange For 60mm Drive By Wire Bosch Throttle Body(0280750150).

Comes Supplied with Viton O-Ring.

CNC Machined from T-6061 Aluminum

$55.00

(AUD, ex gst)

Weld on Flange To suit 60mm Bosch DBW Throttle Body
Weld on Flange To suit 54mm Bosch DBW Throttle Body

Weld on Flange To suit 54mm Bosch DBW Throttle Body

sku: 802-054F

Weld on Flange For 54mm Drive By Wire Bosch Throttle Body(0280750150).

Comes Supplied with Viton O-Ring.

CNC Machined from T-6061 Aluminum

$55.00

(AUD, ex gst)

Weld on Flange To suit 54mm Bosch DBW Throttle Body
T-MAP Sensor weld on boss

T-MAP Sensor weld on boss

sku: H-MAP-ATS-W

Weld On Boss to suit Bosch 3 and 4 BAR T-Map sensors

$30.00

(AUD, ex gst)

T-MAP Sensor weld on boss
IDA mounting flange 55mm bore

IDA mounting flange 55mm bore

sku: 840-011

Flange for fabricating manifolds for IDA series throttle bodies or Weber side down draft carburetors
with 55mm bores. CNC machined 6060 T5 Aluminum. Bolt oles are pilot holes ready to tap M8 or 5/16" after welding.

$55.00

(AUD, ex gst)

IDA mounting flange 55mm bore
IDA mounting flange 50mm bore

IDA mounting flange 50mm bore

sku: 840-010

Flange for fabricating manifolds for IDA series throttle bodies or Weber side down draft carburetors
with 55mm bores. CNC machined 6060 T5 Aluminum. Bolt oles are pilot holes ready to tap M8 or 5/16" after welding.

$55.00

(AUD, ex gst)

IDA mounting flange 50mm bore
DCOE mounting flange 40,45,48,50mm Sizes

DCOE mounting flange 40,45,48,50mm Sizes

sku: 840-005

Flange for fabricating manifolds for DCOE series throttle bodies or weber, solex & dellorto side draft carburettors.
Available with bores sizes 40,45,48 or 50mm diameter. CNC machined 6060 T5 Aluminum. Bolt holes are pilot holes ready to tap M8 or 5/16" after welding, flange is 9.8mm thick.

$40.00

(AUD, ex gst)

DCOE mounting flange 40,45,48,50mm Sizes
air temp sensor nut suits H-A

air temp sensor nut suits H-A

sku: H-ATN

Air temperature sensor boss for welding to steel pipework. Suits Delco air temperature sensor with 14 x 1.5 thread.

$3.00

(AUD, ex gst)

air temp sensor nut suits H-A
20B weld on flange 55mm bores with 120mm centres

20B weld on flange 55mm bores with 120mm centres

sku: 840-014

20B Weld On Flange with 55mm bores and 120mm Centers 20B weld on flange with 50mm bores. CNC machined 6060 T5 Aluminum. Bolt oles are pilot holes ready to tap M8 or 5/16" after welding.

$80.00

(AUD, ex gst)

20B weld on flange 55mm bores with 120mm centres
20B weld on flange 55mm bores with 120mm/150mm centres

20B weld on flange 55mm bores with 120mm/150mm centres

sku: 840-016

A 20B weld on flange 55mm bores with 120mm centers between front and center rotor housings, and 150mm centers between center and rear rotor housings. 20B weld on flange with 50mm bores. CNC machined 6060 T5 Aluminum. Bolt oles are pilot holes ready to tap M8 or 5/16" after welding.

$80.00

(AUD, ex gst)

20B weld on flange 55mm bores with 120mm/150mm centres
20B weld on flange 50mm bores with 120mm centres

20B weld on flange 50mm bores with 120mm centres

sku: 840-013

20B weld on flange with 50mm bores. CNC machined 6060 T5 Aluminum. Bolt oles are pilot holes ready to tap M8 or 5/16" after welding.

$80.00

(AUD, ex gst)

20B weld on flange 50mm bores with 120mm centres
20B weld on flange 50mm bores with 120mm/150mm centres

20B weld on flange 50mm bores with 120mm/150mm centres

sku: 840-015

A 20B weld on flange 50mm bores with 120mm centers between front and center rotor housings, and 150mm centers between center and rear rotor housings. 20B weld on flange with 50mm bores. CNC machined 6060 T5 Aluminum. Bolt oles are pilot holes ready to tap M8 or 5/16" after welding.

$80.00

(AUD, ex gst)

20B weld on flange 50mm bores with 120mm/150mm centres
20B ITB Flange - 55mm 130/160 Spacing

20B ITB Flange - 55mm 130/160 Spacing

sku: 840-018-55

20B weld on flange with 55mm bores. CNC machined 6060 T5 Aluminum. Bolt holes are pilot holes ready to tap M8 or 5/16" after welding.

This flange is specifically designed to suit our 20B ITB Kit 805-006

$80.00

(AUD, ex gst)

20B ITB Flange - 55mm 130/160 Spacing
20B ITB Alloy Weld On Flange - 50mm 130/160 Spacing

20B ITB Alloy Weld On Flange - 50mm 130/160 Spacing

sku: 840-018-50

20B weld on flange with 55mm bores. CNC machined 6060 T5 Aluminum. Bolt holes are pilot holes ready to tap M8 or 5/16" after welding.

This flange is specifically designed to suit our 20B ITB Kit 805-005

$80.00

(AUD, ex gst)

20B ITB Alloy Weld On Flange - 50mm 130/160 Spacing