Lever Arms

Bearing End Dress Cover

sku: 809-925

You can dress up your throttle body where the the throttle shaft bearing is housed.

Bell Crank with Indexable Lever Arm

sku: 811-059

Bell Crank mechanism with Lever Arm - Ideal for opposed throttle systems with Drive By Wire (V8, V6, Boxer 4cyl).

economy series lever arm long

sku: 815-043

Steel lever arm with 5.0mm holes at 23,31,38,50mm from shaft center. Suits 8mm & 5/16" shaft diameter

economy series lever arm short

sku: 815-041

Steel lever arm 5.0mm hole at 24mm from from saft center. Suits 8mm & 5/16" shaft diameter

economy series lever arm standard

sku: 815-042

Steel lever arm 5.0mm holes at 24,32 & 38mm from shaft center. Suits 8mm & 5/16" shaft diameter

Joiner Balancer Pro - With Arm

Lever Arm Length from Shaft Center to M5 Threaded Lever Holes: 39mm, 47mm.
(M5 threaded holes also suits 10/32UNF)

Overall Width: 16mm

Available in Blue, Black and Natural Anodizing.

lever arm - standard

Simple and effective linkage.

Includes shaft lock grub screw and pin hole for throttle stop spring return spring.

Shaft Center To M5 Threaded Lever Holes: 37mm. (M5 threaded hole also suits 10/32UNF)

Overall Length: 50.3mm
Overall Width: 8.3mm

Suits 8mm & 5/16" shaft diameter.

Available in Blue, Black and Natural Anodizing.

lever arm - heavy duty

10mm wide for extra load carrying and clamping force to shaft. Holes are tapped to M5. (M5 threaded holes also suits 10/32UNF)

Shaft Center To M5 Threaded Lever Holes: 34.5, 44.5 & 54.5mm

Overall Length: 73.5mm
Overall Width: 10mm

Suits 8mm & 5/16" shaft diameter.

Available in Blue, Black and Natural Anodizing.

lever arm - short

Compact solution for short throw requirements.

Includes shaft lock grub screw and pin hole for throttle stop spring return spring.

Shaft Center To M5 Threaded Lever Holes: 22mm (M5 threaded hole also suits 10/32UNF)

Overall Length: 36mm
Overall Width: 8.3mm
Suits 8mm & 5/16" shaft diameter.

Available in Blue, Black and Natural Anodizing.

Throttle Arm - Cast with M5 threaded Holes

sku: E-810-028

Throttle Arm - Cast with M5 threaded Holes at 32mm and 40mm from the pivot point.
(M5 threaded holes also suits 10/32UNF)

Suits 5/16" (8mm) round shaft and has provision for a throttle return spring.

Natural colour only.

throttle stop/arm horizontal shaft

Combination lever arm and throttle stop linkage in one. Use on side draft throttle aplications with horizontal shaft. Hole tapped to M5. (M5 threaded hole also suits 10/32UNF) Includes shaft lock grub screw. 37mm from shaft center to threaded hole. Suits 8mm & 5/16" shaft diameter. Comes with R/H spring for CCW opening shaft rotation. use part number 810-002 to change to L/H spring for CW opening spring.

throttle stop/arm vertical shaft

Combination lever arm and throttle stop linkage in one. Use on side draft throttle applications with vertical shaft. Hole tapped to M5.(M5 threaded hole also suits 10/32UNF) Includes shaft lock grub screw. 37mm from shaft center to threaded hole. Suits 8mm & 5/16" shaft diameter. Comes with R/H spring for CCW opening shaft rotation. Use part number 810-002 to change to L/H or CW opening spring.

Available in Blue, Black and Natural Anodizing.

Throttle Stop with Indexable Arm Linkage

sku: 811-017

Full Throttle Stop with Return Spring, Adjustable Idle Stop, Fully Indexable Linkage Arm. M5 Threaded holes (M5 threaded holes also suits 10/32UNF)

Available in Blue and Black.

This is well suited to Drive By Wire applications