We ship anywhere in Australia and World Wide

Your cart has 0 item(s)

Home  /  New Products  /  Current New Products

Current New Products


Page: 12>

Sort: Product NamePriceCode

Billet steel Trigger Disk 60-2 to Bosch Specification

Billet steel Trigger Disk 60-2 to Bosch Specification

sku: H-TRIG8-BL

Steel Trigger Disc 60-2 Teeth
Width 12.5mm
Out Side Diameter - 162.34m
Tooth Height 3.4mm
Tooth Width - 3.8mm
Gap Between Teeth 4.7mm
Leading Edge to Leading Edge 18°
Note - Sensor and mount not included

Use With H-GTSEN-REL2 Bosch M/Sport Reluctor Sensor Aslo Avialable Universal Mount to Suit H-GTSEN-MOUNT-2 Bosch Gear Tooth Sen Mount.

$200.00

(AUD, ex gst)

Billet steel Trigger Disk 60-2 to Bosch Specification
EFI Hardware Fuel Pressure Regulator / Damper Housing

EFI Hardware Fuel Pressure Regulator / Damper Housing

This Regulator Housing suits fixed, pot type Bosch Regulators that are available in 2.7, 3.0, 3.5,4.0, 5.0 and 7.0 bar or Fuel Damper.

-6AN ORB Inlet and Outlet Ports.

Includes both 6mm fasteners for through hole and M6 fasterners for threaded hole for mounting.
** Regulator not included**
When used with the pot damper it can help eliminate fuel pressure spikes, pulsations and harmonics in the fuel rail caused by large injectors and amplified by teflon lined hose.

from $120.00

(AUD, ex gst)

EFI Hardware Fuel Pressure Regulator / Damper Housing
Tyco Battery Isolator

Tyco Battery Isolator

sku: H-CB-KIT

TE battery 130 AMP isolator kit.
Solid state high current battery isolator with remote switching. Features M6 Terminal Studs and includes 2 Pin Connector Plug.

$120.00

(AUD, ex gst)

Tyco Battery Isolator
RB20 RB25 RB26 Ignition Coil Upgrade kit

RB20 RB25 RB26 Ignition Coil Upgrade kit

sku: H-COIL-RBKIT

RB20, RB25 & RB26, Igniton coil upgrade kit using genuine Hitachi / Nissan VQ35 Ignition coils. Also Includes Coil Plugs kits Mounting bracket and fasteners

$900.00

(AUD, ex gst)

RB20 RB25 RB26 Ignition Coil Upgrade kit
Submersible Bulkhead Terminals Hex Head

Submersible Bulkhead Terminals Hex Head

THIS BULKHEAD TERMINAL IS E85 COMPATIBLE.
Bulk head terminal for passing power through a bulk head or fuel tank. Max 30AMP per terminal. Delrin plastic insulator, viton orings and stainless steel bolt(M6 x 30mm) washers and nyloc nut.
Ideal for providing power to submersible pump(s)
NOTE ***Sold as 1 each not as a pair.**
14mm Hex enables Insulating sealing cups to be torqued up against each other ensuring a tight seal eliminating bad resistance resulting in excessive heat from high amperage

from $18.00

(AUD, ex gst)

Submersible Bulkhead Terminals Hex Head
Large Wiring Splice Crimp Terminal

Large Wiring Splice Crimp Terminal

sku: CWA-WS2

20 Pack of large zinc plated splice terminals

Will accept up to 2 x 12 Tefzel wires, or 1.5-2.0mm2

$12.00

(AUD, ex gst)

Large Wiring Splice Crimp Terminal
AMP 34 & 26 Pin Backshells

AMP 34 & 26 Pin Backshells

Billet CNC machined backshell to suit 26 & 34 pin AMP Superseal connectors to allow heat shrink boots to be fitted. (Used on MoTec, Haltech, Link, Holley ECUS etc)

from $36.00

(AUD, ex gst)

AMP 34 & 26 Pin Backshells
Heat shrink boots and back shells to suit 26&34 AMP connectors

Heat shrink boots and back shells to suit 26&34 AMP connectors

Backshells with heat shrink boots kit for AMP Superseal 26/34 connectors.
Includes Billet CNC machined backshells and choice of Raychem 90 degree or straight heat shrink boots.

from $115.00

(AUD, ex gst)

Heat shrink boots and back shells to suit 26&34 AMP connectors
Wiring Splice Crimp Terminal Combo Kit

Wiring Splice Crimp Terminal Combo Kit

sku: CWA-WSC

30 Pack of zinc plated splice terminals

20 Standard will accept up to 2 x 14 Tefzel wires, or 1.0-1.5mm2

10 Standard will accept up to 2 x 12 Tefzel wires, or 1.5-2.0mm2

$17.00

(AUD, ex gst)

Wiring Splice Crimp Terminal Combo Kit
2 Pin Air Temp Sensor Connector

2 Pin Air Temp Sensor Connector

sku: C-02FR4-6-8

Supplied with Female Pins and Wire Seals.
APPLICATIONS:
RX7 FD Air Intake Temp (93-02)

$15.00

(AUD, ex gst)

2 Pin Air Temp Sensor Connector
Bosch Motorsport Reluctor Speed Sensor

Bosch Motorsport Reluctor Speed Sensor

sku: H-GTSEN-REL2

Bosch Motorsport reluctor style speed sensor.
Bosch # 0 261 210 104. Idea to use with 36-1 or 62-2 trigger disc / wheels
also see H-TRIG8-BL Bosch Spec trigger disc

from $85.00

(AUD, ex gst)

Bosch Motorsport Reluctor Speed Sensor
BA-BF  Throttle Body Extension Loom

BA-BF Throttle Body Extension Loom

sku: H-LOOM-TBEXT

Throttle body extension loom for a BA-BF Ford Falcon Throttle Electronic Throttle. 500mm long. Great for throttle body relocation's when installing turbo or supercharger

$75.00

(AUD, ex gst)

BA-BF  Throttle Body Extension Loom
26 Way AMP Super Seal Kit "3" Keying

26 Way AMP Super Seal Kit "3" Keying

sku: C-ECU-26-3

26 Pin Superseal connector with "2" Keying, Suits MoTec M150, Link Thunder and more.
Includes housing and terminals

$40.00

(AUD, ex gst)

26 Way AMP Super Seal Kit "3" Keying
32MM Bosch DBW flange With Spigot

32MM Bosch DBW flange With Spigot

Bosch Drive by wire Throttle body flange with spigot to suit 1.5" silicon hose enables this electronic DBW throttle body to be used as a Blow Of Valve, Bypass Valve and Anti-Surge Valve. Aids in anti lag and start line spooling tuning.

from $120.00

(AUD, ex gst)

32MM Bosch DBW flange With Spigot
34 Way AMP Super Seal Kit "2" Keying

34 Way AMP Super Seal Kit "2" Keying

sku: C-ECU-34-2

34 Pin Superseal connector with "2" Keying, Suits MoTec M150, Link Thunder and more.
Includes housing and terminals

$40.00

(AUD, ex gst)

34 Way AMP Super Seal Kit "2" Keying
Raychem Heat Shrink Boots

Raychem Heat Shrink Boots

90 Degree & Straight heat shrink boots to suit 26 & 34 pin AMP Backshell, and other large connectors. This is for the heat shrink boots only -
Straight boot Raychem# 202K162
90 Degree boot Raychem# 222K163

from $34.00

(AUD, ex gst)

Raychem Heat Shrink Boots
AMP Superseal Terminals

AMP Superseal Terminals

AMP Superseal Terminals to suit AMP 26 & 34 Pin 4 Row connectors.

APPLICATIONS:

MoTeC - M400 / M600 / M800 / PDM15 / PDM30 / E888 / M84
Wolf - V500 / V550
Haltech - PS1000 / PS2000 & Elite 550, 750, 1000, 1500, 2000, 2500
Adaptronic M2000
Suzuki Hayabusa -GSX1300R Gen I ECU

from $14.00

(AUD, ex gst)

AMP Superseal Terminals
Walbro  GSS-351G3 750HP Submersible Pump

Walbro GSS-351G3 750HP Submersible Pump

sku: 866-751

TI Automotive GSS351G3.
Generation 3 of the GSS series fuel pumps feature an upgrade in flow from 255 to 350 Lt/Hr from the gen 2 version (GSS341 &GSS342) but with 350 Liters Per hour.

$160.00

(AUD, ex gst)

Walbro  GSS-351G3 750HP Submersible Pump
Walbro  GSS-352G3 750HP Submersible Pump

Walbro GSS-352G3 750HP Submersible Pump

sku: 866-752

TI Automotive GSS352G3.
Generation 3 of the GSS series fuel pumps feature an upgrade in flow from 255 to 350 Lt/Hr from the gen 2 version (GSS341 &GSS342) but with 350 Liters Per hour.

$160.00

(AUD, ex gst)

Walbro  GSS-352G3 750HP Submersible Pump
Walbro 550 850HP Submersible Pump, Hellcat Plus

Walbro 550 850HP Submersible Pump, Hellcat Plus

sku: 866-850E

Walbro TI Automotive F90000295 1000+HP Submersible Pump. 550LPH

This Walbro fuel pumps is commonly referred to as a Walbro 550 fuel pump and is a E85 comptible.


E85, Flex Fuel and Gasoline compatible fuel pump that flows 530 L/Hr @ 3BAR
E85 - 900HP
Gasoline - 1200HP
No One Way Valve Fitted

$250.00

(AUD, ex gst)

Walbro 550 850HP Submersible Pump, Hellcat Plus
Page: 12>