HomeIntake HardwareLinkagesDrop links
Drop Link Kit - Including Rod Ends
In Stock
Product Code: 815-060K
$57.20
inc GST for Australian CustomersAUD $52.00 (ex GST)
for International Customers
inc GST for Australian CustomersAUD $52.00 (ex GST)
for International Customers
25.00
GBP28.98
EUR56.67
NZD4,989.50
JPY33.92
USD
GBP28.98
EUR56.67
NZD4,989.50
JPY33.92
USD
approximate only
Options:
Our Drop Link Kits come complete with:
- Left-hand and right-hand M5 threaded rod ends
- M5 x 0.8 Jam nuts
- 2x Stainless screws with tapered stand offs to allow for full range of motion of the bearings
Our Drop Link Rods have a diameter of 7.6mm and hex (8mm) to assist in locking off the jam nuts
Supplied in Black anodizing
*Blue and natural anodizing available upon request
Details
Details: You want your engine to run and idle reliably and consistently. Achieving a quick and accurate setup is one of the keys to getting this result. EFI Hardware Drop Links are assembled using high grade rod ends with the spherical bearing hole designed to receive an M5 fastener. One end of the rod has a right-hand thread, and the other end has a left-hand thread allowing you to easily make very small adjustments to the Drop Link length, while the Drop Link is installed on your engine.
Kit Contents :
1x left hand threaded rod end & jam nut (M5 x 0.8)
1x right hand threaded rod end & jam nut (M5 x 0.8)
2x M5 stainless steel cap screws
2x tapered stand offs. (misalignment spacers)
Colour Finish: Our linkage components are available in Black coloured anodizing only.
Dimensions:
815-060K Rod Working Length Center to Center adjustable 60mm to 80mm
815-061K Rod Working Length Center to Center adjustable 79mm to 105mm
815-062K Rod Working Length Center to Center adjustable 94mm to 120mm
815-063K Rod Working Length Center to Center adjustable 107mm to 130mm
815-064K Rod Working Length Center to Center adjustable 125mm to 145mm
815-065K* Rod Working Length Center to Center adjustable down from 255mm
* 815-065K has 25mm worth of Right Hand thread tapped, it can be trimmed shorter and drilled and tapped deeper to suit custom length.
