Product Code: 855-646HS
inc GST for Australian CustomersAUD $90.00 (ex GST)
for International Customers
Half Height Injector with optional Injector Height Adapters with either 11mm or 14mm top orings to suit your fuel rail.
THIS INJECTOR IS E85 COMPATIBLE.
104 HP Normally Aspirated - estimated (pump petrol)
87 HP Turbo up to 1 Bar Boost - estimated (pump petrol)
80 HP Turbo up to 2 Bar Boost - estimated (pump petrol)
> Flow Rate - 646cc/min (63Lb/Hr) @3.0Bar
> ORings - 14mm Top / 14mm Bottom
> Electrical Plug - Bosch Minitimer (Square)
> Impedance - 12.2 Ohm (High)
> Spray Pattern - 30 Degree Cone
> Oring Top to Bottom / Center to Center without Height Adapter - 38.0mm
> Oring Top to Bottom / Center to Center with 11mm Top Oring Height Adapter - 67.5mm
> Oring Top to Bottom / Center to Center with 14mm Top Oring Height Adapter - 67.5mm
> Manufacture - Siemens - Part Number FI114962
Siemens SHORT Series Injector
NOTE: All Siemens Injectors come with a 12 Month Warranty.
We can modify these Injectors to suit a fuel rail that requires fuel injectors wth an 11mm top oring at a cost of $10 excluding GST per injector.
INJECTOR CONNECTORS TO SUIT:
Replacement injectors are only as good as the wiring, pins and plugs that supply current
and voltage to them.
This is an ideal time to check your injector plugs and pins for signs of pin corrosion, pins
splayed open and crumbling plastic connectors.
If in doubt, it can be cheap insurance to replace your injector connectors with brand new items to ensure positive electrical connections.
|H-INJP||injector plug, pins and seals - No boot|
|H-INJPB2||injector plug with high quality boot|
|852-LOOM2||Bosch Injector To USCAR Loom Adapter|
|852-LOOM4||Bosch Injector To Nissan Loom Adapter|
|852-LOOM6||Bosch Injector To USCAR Loom Adapter - Hard|
|852-LOOM8||Bosch Injector To Denso Loom Adapter|
|880-220||fuel injector filter basket removal tool|