Your Cart
has 0 item(s)

+61 3 9873 5400

Mon-Fri 8:00 - 5:30

HomeFuel System PartsFuel Tank Conversion Kits

EFI Fuel Tank Conversion Kit to suit BA-BF Falcon Fuel Pump 180mm to 215mm high

In Stock

Product Code: 850-110AK

$159.50
inc GST for Australian Customers
AUD $145.00 (ex GST)
for International Customers
74.65
GBP
89.09
EUR
159.31
NZD
14,500.63
JPY
97.83
USD
approximate only?International prices are based on the tax exclusive amount, and are approximate only (may change when payment is processed).

All orders are charged in AUD

Options:



Using an MRA (Modular Reservoir Assembly) is a great way to get a fuel pump and surge tank solution straight into your tank.
Fuel Tank EFI Conversion Kit, 180mm to 215mm high for use with a BA-BF Falcon Modular Reserve Assembly. (Supplied optionally from the pull down menu.) Using an MRA is a great way to get a fuel pump and surge tank solution straight into your tank
Comes with weld on base plate, top plate, cap screws, washers & oring.
Electrical plug and Quick disconnect to push on hose fittings also supplied.
Does not include fuel level sender.

Pump Power Rating - Naturally Aspirated: 500HP / 370KW

Details
NOTE: If you select the Bolt On option, your tank must have a flat and seamless surface for the entire area of the Base Plate to ensure the O-ring will seal completely.  See the technical document below for the bolt on kit below for more information.
 
WHAT'S IN THE BOX:
  • INSTALLATION KIT ONLY

Top Plate:  Aluminium

Base Plate Type and Material:  Weld On - Aluminium or Steel / Bolt On - Aluminium

Base Plate Diameter:  Weld On - 154mm / Bolt On - 164mm

Electrical Connector:  To suit Ford BA FPV MRA PN# 850-110P

Quick Disconnect Fuel Fittings:  1 x 3/8", 2 x 5/16"

Fasteners:  6 x M5 Stainless Steel Cap Screws with Washers and Locking Washers

O-Ring:  Fuel safe O-Ring

Max Tank Height: 215mm

Min Tank Height: 180mm


  • Pump & installation Kit

MRA:  Genuine Delphi BA F6 FPV Modular Reserve Assembly (fuel pump unit)

Fuel pressure regulator: No internal regulator


  • Aftermarket Pump & Installation kit

MRA: Aftermarket Icon Branded  BA F6 FPV Modular Reserve Assembly (fuel pump unit)

Fuel pressure regulator: No internal regulator.



The MRA unit houses the Fuel Pump, fuel reservoir (with return venturi jet for constant siphoning), fuel submersible wiring and fuel hose with bulk head assembly in one unit. It is spring loaded to ensure that it sits on the bottom of the fuel tank for maximum fuel scavenging.


No need for a lift pump, surge tank, high pressure pump, external fittings and plumbing  it is all neatly housed inside the fuel tank, reducing noise and fuel odour inside the cabin.


 
Related Items