Product Code: 855-2433
inc GST for Australian CustomersAUD $330.00 (ex GST)
for International Customers
All variations of this product are currently out of stock.
THIS INJECTOR IS E85 COMPATIBLE.
450 HP Normally Aspirated - estimated (pump petrol)
391 HP Turbo up to 1 Bar Boost - estimated (pump petrol)
360 HP Turbo up to 2 Bar Boost - estimated (pump petrol)
> Flow Rate - 2433cc/min (220Lb/Hr) @3.0Bar
> ORings - 14mm Top / 14mm Bottom
> Electrical Plug - Bosch Minitimer (Square)
> Impedance - (Low)
> Manufacture - Siemens - Part Number FI114212
It is recommended that all sets of injectors are flow matched. From our experience there can be up to 8% flow differential if injectors are randomly chosen.
We aim for under 1% for all of our flow matched sets.
This is an example of what you will receive with each set of flow matched injectors.
NOTE: All Siemens Injectors come with a 12 Month Warranty.
We can modify these Injectors to suit a fuel rail that requires fuel injectors wth an 11mm top oring at a cost of $10 excluding GST per injector.
INJECTOR CONNECTORS TO SUIT:
Replacement Siemens Hi Flow Fuel Injectors are only as good as the wiring, pins and plugs that supply current
and voltage to them.
This is an ideal time to check your injector plugs and pins for signs of pin corrosion, pins
splayed open and crumbling plastic connectors.
If in doubt, it can be cheap insurance to replace your injector connectors with brand new items to ensure positive electrical connections.
|H-INJP||injector plug, pins and seals - No boot|
|H-INJPB2||injector plug with high quality boot|
|852-LOOM2||Bosch Injector To USCAR Loom Adapter|
|852-LOOM4||Bosch Injector To Nissan Loom Adapter|
|852-LOOM6||Bosch Injector To USCAR Loom Adapter - Hard|
|852-LOOM8||Bosch Injector To Denso Loom Adapter|