We ship anywhere in Australia and World Wide
Mon-Fri 8:00 - 5:30
Your cart has 0 item(s) |
Home / Fuel System Parts / Fuel Injectors, Bosch Fuel injectors / Fuel Injector Height Adaptors
Use these EFI Hardware Injector Height Adapters to enable you to fit 3/4 and 1/2 height injectors into full height injector setups.
Sort: Product NamePriceCode
This injector converts a half height injector with a 14mm top oring (38.5mm oring centre to oring centre) to a full height injector (64.5mm oring centre to oring centre) with an 14mm top oring.
NOTE: Injectors Not Included.
$22.00
(AUD, ex gst)
This injector converts a half height injector (38.5mm oring centre to oring centre) to a 3/4 height injector (53.5mm oring centre to oring centre).
NOTE: Injectors Not Included.
$10.00
(AUD, ex gst)
This injector converts a 3/4 height injector (53mm oring centre to oring centre) to a full height injector (64.5mm oring centre to oring centre).
NOTE: Injectors Not Included.
Specific to 3/4 height extended nose injectors. Does not suit 1/2 height Extended Nose Injectors
$11.00
(AUD, ex gst)
This injector converts a half height injector with a 14mm top oring (38.5mm oring centre to oring centre) to a full height injector (64.5mm oring centre to oring centre) with an 11mm top oring.
NOTE: Injectors Not Included.
$22.00
(AUD, ex gst)
This 1/2 Height to 3/4 Height Injector Height Adapter has been specifically designed to convert 1/2 height injectors with 14mm top orings into the correct length to replace 3/4 height injectors with 11mm top orings.
$12.00
(AUD, ex gst)
This 1/2 Height to 3/4 Height Injector Height Adapter has been specifically designed to convert 1/2 height injectors with 14mm top orings into the correct length to replace 3/4 height injectors with 14mm top orings.
$12.00
(AUD, ex gst)
This Injector Height Adapter is specifically designed to adapt 3/4 height injectors into full height injectors with 11mm top seal to suit original Nissan fuel rails.
Nissan fuel rails require a special height adapter with a thinner wall thickness to suit the Nissan specific o-ring for their Top Feed fuel injectors.
The fuel filter is pre-installed inside the lower section of this height adapter.
$12.00
(AUD, ex gst)
Injector Height Adapters are commonly used to allow you to fit shorter injectors into fuel rail setup that originally had long injectors.
Injector Top Oring - 14mm
Fuel Rail Outlet - 11mm
$12.00
(AUD, ex gst)
Injector Height Adapters are commonly used to allow you to fit shorter injectors into fuel rail setup that originally had long injectors.
Injector Top Oring - 14mm
Fuel Rail Outlet - 11mm
Note For adapters to suit Nissan Fuel Rails use part number 851-11SPNIS
$12.00
(AUD, ex gst)
Injector Height Adapters are commonly used to allow you to fit shorter injectors into fuel rail setup that originally had long injectors.
Injector Top Oring - 14mm
Fuel Rail Outlet - 14mm
$12.00
(AUD, ex gst)
Injector Height Adapters are commonly used to allow you to fit shorter injectors into fuel rail setup that originally had long injectors.
Injector Top Oring - 14mm
Fuel Rail Outlet - 14mm
Converts 3/4 Height injectors to Full Height
$12.00
(AUD, ex gst)