Product Code: 850-121S
inc GST for Australian CustomersAUD $310.00 (ex GST)
for International Customers
Fuel Tank EFI Conversion Kit for Steel Tank 255 to 305mm high using VT Commodore MRA (Modular Reserve Assembly).
This MRA has a high pressure fuel outlet, a return line and a breather line. Quick disconnect inlet, outlet and breather connectors on top. Comes with weld on base plate, top plate, cap screws, washers & oring.
Electrical plug and Quick disconnect to push on hose fittings also supplied.
Weld in Ring is 139.6mm OD
WHAT'S IN THE BOX:
MRA: VT S1 V8 Modular Reserve Assembly (fuel pump)
Weld on Plate: Steel
Clamp Plate: Aluminium
Base plate diameter: 139mm
Fuel pressure regulator: No internal regulator
Electrical Connector: To suit VT- 850-120E
Quick Disconnect Fuel Fittings: 2x 10mm to 10mm barb 2x 8mm to 8mm barb
Fasteners: 6 x M5 Stainless Steel Cap Screws with Washers and Locking Washers
O-Ring: Fuel safe O-Ring
Max tank height: 255mm
Min tank height: 310mm
HP rating: 500HP @ 4 BAR
The MRA unit houses the Fuel Pump, fuel reservoir (with return venturi jet for constant siphoning ), fuel submersible wiring and fuel hose with bulk head assembly in one unit. It is spring loaded to ensure that it sits on the bottom of the fuel tank for maximum fuel scavenging.
No need for a lift pump, surge tank, high pressure pump and external regulator, it is all neatly housed inside the fuel tank, reducing noise and fuel odour inside the cabin.