| injector 1/2 height 1370cc @ 4Bar / 1140cc @ 3Bar
https://www.efihardware.com/products/2671/injector-12-height-1370cc-4Bar-1140cc-3Bar
EV14 Half Height Extended Nose Injector with optional Injector Height Adapters with either 11mm or 14mm top orings to suit your fuel rail.
THIS INJECTOR IS E85 COMPATIBLE.
184 HP Normally Aspirated (0.5 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Pressure) - estimated (pump petrol)
153 HP Turbo (0.6 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Pressure) up to 1 Bar Boost - estimated (pump petrol)
142 HP Turbo (0.65 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Presure) up to 2 Bar Boost - estimated (pump petrol)
> Flow Rate - 1140cc/min (120Lb/Hr) @ 3.0Bar 1370cc (143 Lb/Hr) @4 Bar
> ORings - 14mm Top / 14mm Bottom
> Electrical Plug - Bosch (Oval)
> Impedance - 12.0 Ohms (High)
> Spray Pattern - Split Cone
> Oring Top to Bottom / Center to Center without Height Adapter - 38.0mm
> Oring Top to Bottom / Center to Center with 11mm Top Oring Height Adapter - 64.5mm
> Oring Top to Bottom / Center to Center with 14mm Top Oring Height Adapter - 64.5mm
> Manufacture - Bosch
|