| injector 23 lb/hr 238cc 14mm Siemens AUD $45.00 (ex GST) 47 HP Normally Aspirated - estimated
41 HP Turbo up to 1 Bar Boost - estimated
38 HP Turbo up to 2 Bar Boost - estimated
NOTE: This is a high impedance injector - 14 Ohm. |
|---|
| injector 45 lb/hr 465cc GM Gen4 Siemens AUD $45.00 (ex GST) 92 HP Normally Aspirated - estimated
80 HP Turbo up to 1 Bar Boost - estimated
74 HP Turbo up to 2 Bar Boost - estimated
Siemens 465cc GM Gen4 injector, 45 lb/hr @ 3.0 bar fuel pressure. 92 hp naturally aspirated, high impedance. split spray.
part # FI114357 |
|---|
| Injector 47 lb/hr GM Gen4 short 495cc Siemens AUD $55.00 (ex GST) 95 HP Normally Aspirated - estimated
82 HP Turbo up to 1 Bar Boost - estimated
76 HP Turbo up to 2 Bar Boost - estimated
Siemens 495cc injector, 14mm o ring top 14mm o ring bottom, 47lb/hr @ 3.0 bar fuel pressure. 95 hp naturally aspirated, high impedance, Part# FI11354, uses USCAR electrical plug. -see below |
|---|
| Injector 53 lb/hr GM Gen4 short 556cc Siemens AUD $55.00 (ex GST) 107 HP Normally Aspirated - estimated
93 HP Turbo up to 1 Bar Boost - estimated
86 HP Turbo up to 2 Bar Boost - estimated
Siemens 556cc GM Gen4 injector, 14mm o ring top 14mm o ring bottom, 53lb/hr @ 3.0 bar fuel pressure. 107 hp naturally aspirated, high impedance, uses square Bosch electrical plug. Part# FI114510.
This is direct performance upgrade replacement for VZ, VE 6/8 cyl & LS2 motors. |
|---|
| injector 57 lb/hr 587cc 14mm Siemens AUD $55.00 (ex GST) 114 HP Normally Aspirated - estimated
99 HP Turbo up to 1 Bar Boost - estimated
91 HP Turbo up to 2 Bar Boost - estimated
Siemens 587cc injector, 14mm o ring top 14mm o ring bottom, 57lb/hr @ 3.0 bar fuel pressure. 114 hp naturally aspirated, low impedance. pencil spray. 2.35 Ohms resistance uses square Bosch electrical plug.
part # FI11402 |
|---|
| injector 63 lb/hr 646cc 14mm short Siemens AUD $55.00 (ex GST) 127 HP Normally Aspirated - estimated
110 HP Turbo up to 1 Bar Boost - estimated
102 HP Turbo up to 2 Bar Boost - estimated
Siemens SHORT Series 646cc injector, 14mm o ring top 14mm o ring bottom, 63lb/hr @ 3.0 bar fuel pressure. 127 hp naturally aspirated, high impedance, 12.2 Ohms resistance uses square Bosch electrical plug. Deka lV type 30 degree cone spray
part# FI114962 |
|---|
| injector 63 lb/hr 646cc 14mm Siemens AUD $55.00 (ex GST) 127 HP Normally Aspirated - estimated
110 HP Turbo up to 1 Bar Boost - estimated
102 HP Turbo up to 2 Bar Boost - estimated
Siemens 646cc injector, 14mm o ring top 14mm o ring bottom, 63lb/hr @ 3.0 bar fuel pressure. 127 hp naturally aspirated, high impedance, cone spray. 12.2 Ohms resistance uses square Bosch electrical plug. Deka lV type
part# FI114961 |
|---|
| injector 73 lb/hr 769cc 14mm Siemens AUD $55.00 (ex GST) 148 HP Normally Aspirated - estimated
129 HP Turbo up to 1 Bar Boost - estimated
118 HP Turbo up to 2 Bar Boost - estimated
Siemens 769cc injector, 14mm o ring top 14mm o ring bottom, 73lb/hr @ 3.0 bar fuel pressure. 148 hp naturally aspirated, pencil spray, low impedance. 2.3 Ohms resistance uses square Bosch electrical plug. Deka 1A type.
part# FI11445 |
|---|
| injector 83 lb/hr 875cc 14mm Siemens AUD $55.00 (ex GST) 168 HP Normally Aspirated - estimated
146 HP Turbo up to 1 Bar Boost - estimated
134 HP Turbo up to 2 Bar Boost - estimated
Siemens 875cc injector, 14mm o ring top 14mm o ring bottom, 83lb/hr @ 3.0 bar fuel pressure. 168 hp naturally aspirated, high impedance. uses square Bosch electrical plug.
Part# FI114992 |
|---|
| injector 83 lb/hr GM Gen4 875cc Siemens AUD $55.00 (ex GST) 168 HP Normally Aspirated - estimated
146 HP Turbo up to 1 Bar Boost - estimated
134 HP Turbo up to 2 Bar Boost - estimated
Siemens 875cc GM Gen4 injector, 14mm o ring top 14mm o ring bottom, 83lb/hr @ 3.0 bar fuel pressure. 168 hp naturally aspirated, high impedance, uses square Bosch electrical plug.
part# FI114991 |
|---|
