Home » EFI Hardware Products » Electronics » Temprature and Pressure Sensors and Plugs
Temprature and Pressure Sensors and Plugs
| Page: | 1 | 2 | > |
Sort: Product Name, Price, Code
| exhaust temp pyrometer ferrel stainless steel AUD $9.00 (ex GST)
Stainless Steel Exhaust Temperature Pyrometer Ferrel. | |||
|---|---|---|---|---|
| exhaust temp pyrometer ferrel aluminium weld in AUD $6.00 (ex GST)
exhaust temp pyrometer ferrel aluminium weld on 1/8" BSP. | |||
| coolant temp sensor delco AUD $45.00 (ex GST)
Delco coolant temperature sensor. M12 x 1.5mm thread. | |||
| air temp sensor Delco 14mm AUD $30.00 (ex GST)
Delco air temperature sensor thread is 14 x 1.5mm | |||
| connector air temp sensor AUD $8.00 (ex GST)
Weather pack connector to suit Delco air temperature sensor. | |||
| air temp sensor-bung alloy AUD $15.00 (ex GST)
Air temperature sensor boss for welding to aluminium pipework. Suits Delco air temperature sensor with 14 x 1.5 thread. | |||
| air temp sensor nut suits H-A AUD $3.00 (ex GST)
Air temperature sensor boss for welding to steel pipework. Suits Delco air temperature sensor with 14 x 1.5 thread. | |||
| air temperature sensor motorsport series 1/8 bsp AUD $25.00 (ex GST)
| |||
| coolant temprature sensor motor sport series 1/8 bsp AUD $25.00 (ex GST)
| |||
| connector motorsport series sensors AUD $8.00 (ex GST)
| |||
| coolant temperature sensor Bosch AUD $30.00 (ex GST)
Bosch coolant temperature sensor. Used in most after market ECU applications. Use with plug part no H-INJPB | |||
| water temperature sensor plug kit AUD $8.00 (ex GST)
Equivalent Bosch Part Number: 9 122 067 011 | |||
| exhaust gas temperature sensor K-type thermocouple w/ 1/8 gland nut AUD $120.00 (ex GST)
K-Type Thermocouple for exhaust temperature sensing. | |||
| Exhaust Pyrometer Boss AUD $5.60 (ex GST)
Exhaust pyrometer boss 1/4" OD - 1/8"NPTF ID standard thread. Mild steel unplated for welding into primary and tail pipes for use with exhaust temperature pyrometer using a 1/8 NPT thread. | |||
| Exhaust Pyrometer Boss Stepped AUD $6.00 (ex GST)
Exhaust pyrometer boss 1/4" OD - 1/8"NPTF ID standard thread. This model has a step to assist in in placement and welding. Mild steel unplated for welding into primary and tail pipes for use with exhaust temprature pyrometer using a 1/8 NPT thread. | |||
| pressure sensor 100 PSI AUD $200.00 (ex GST)
Pressure sensor to suit fluid or gas pressures, up to 100PSI Delphi. Use with H-TPSDCFL plug | |||
| pressure sensor TI Brand 100 PSI Absolute TI brand AUD $200.00 (ex GST)
TI Presure sensor 100 PSI Absolute. 6.5 Bar Map Sensor. | |||
| pressure sensor TI Brand 150 PSI Gauge TI brand AUD $200.00 (ex GST)
TI pressure Sensor 150 PSI. | |||
| pressure sensor TI Brand 250 PSI Absolute TI brand AUD $200.00 (ex GST)
TI Presure sensor 250 PSI Absolute 16 Bar Map Sensor. | |||
| pressure sensor 250 PSI Gauge TI brand AUD $200.00 (ex GST)
|
| Page: | 1 | 2 | > |
Shopping Cart
Your cart is empty